Interview Questions.

Q1. What Is The Kernel Of Catia?

CNEXT 

Q2. How Many Degrees Of Freedom Are There For Points. Lines, Circles & Ellipse In 2 Dimensions?

Degree of freedom for points & ellipse is two for circles it is 3 & for ellipse it is 5 in two dimensions. 

Q3. Can We Redefine The Sketches?

Yes. 

Q4. What Is The Meaning Of Mean Dimension?

Mean size is the dimension that should be mern of all of the dimensions, which might be tolerance. 

Q5. How Do You Measure Arc Length?

We can measure arc duration by using the use of MEASURE ITEM command. Sometimes we need to customize the option for arc length if it is not checked in advance using customization in MEASURE ITEM command. 

Q6. What Is Sketch Tools In Sketcher Workbench & Explain The Importance Of It?

SKETCH TOOLS in sketcher workbench are the instructions, which find very use in growing sketches. SKETCH TOOLS are particularly geometric and dimensional constraints, production factors/wellknown factors and Grid option. They play very critical role in sketching, on every occasion we want to constrain a sketch we use those options and if we need to convert any detail right into a production element once more these alternatives come into picture.

Q7. How Many Axis Can Be Created In A Single Sketch?

Only one axis may be created in a cartoon, if multiple axis are drawn then best considered one of them, the modern-day one, will be axis and others might be converted into reference factors. 

Q8. What Is The Save Extension Of Sketcher File?

CAT Part 

Q9. How Many Dimensions Are Required To Constrain The Ellipse?

Three dimensions are required specifically most important axis, minor axis and the distance from the origin. 

Q10. Is It Possible To Directly Enter The Part Design Workbench, When We Start The Catia Session. Instead Of Assembly Design Workbench?

No, we can not enter directly into the component layout. 

Q11. What Is The Importance Of Sketch Tools?

This device bar best seems when you are in sketcher workbench. The four equipment determined on this tool bar are toggle gear. When device is highlighted the tool is on. This particular tool bar adjustments depending on what other sketcher workbench device is presently decided on. 

Q12. What Is Rho Value For Ellipse, Parabola And Hyperbola?

Parabola has RHO values of zero.5, Ellipse has RHO value among 0 & zero.Five and Hyperbola has RHO value b/w zero.Five & 1.0. 

Q13. That Is The Use Of Cut Part By Sketch Plane?

This undertaking indicates the way to make a few edges seen. In other words, we are going to simplify the sketch plane via hiding the part of the cloth that is not wanted for sketching. 

Q14. Can We Select Non-planar Surface As Sketch Plane?

No, we can't pick out a non-planar floor as sketch. 

Q15. Is It Possible To Directly Enter In To Sketcher Workbench?

No, it is not viable to enter in to sketcher workbench at once. We should go for any workbench &form there we will input the sketcher workbench.. 

Q16. What Is Kernel?

The kernel is the basic quintessential a part of an working system that allocates assets which includes low- degree hardware interfaces & protection. 

Q17. Mention The Color Code Of Iso-constrained, Insider, And Over Con Strained Elements?

The coloration code for these elements is Green. White and Magenta respectively. 

Q18. Does Catl4v5 Work On Unix Platform?

Yes 

Q19. Which Is The Tool Used To Exit From Sketcher Workbench To Part Design Workbench?

Exit Sketcher. 

Q20. Where Do We Use Axis?

Axis is used in developing shaft (revolved) feature. 

Q21. What Is The Use Of Isolate In Sketcher Workbench?

Isolated is used when three-D geometry is projected on to a sketch for you to be changed and used as a part of the sketch’s profile. 

Q22. If I Donor Want The Relation B/w Original And Mirrored Elements What Should I Do?

Explore and the relation b/w the original and reflect element doesnt go out. 

Q23. What Is The File Extension Of A Part File?

File Extension of Part report is dot CATPart (.CATPart) 

Q24. What Do Catia Pi, Catia P2 And Catia P3 Mean?

Pi, P2 and P3 will suggest the distinctive varieties of systems of CATIA. Higher the variety sophisticated might be the software program. 

Q25. Expand Catiav?

Computer Aided Three Dimensional Interactive Application. 

Q26. What Are The Default Units Of Lmt (duration. Mass And Time) ?

Mm, Kg, Second. 

Q27. What Is Show/conceal Option?

Show mode allow us to peer all of the components currently opened and in Hide mode we will hide the favored factors from the view for time being. 

Q28. What Is The Meaning Of True Dimension?

True measurement is the size favored after the machining. In different phrases, that is the price that should be attained after the machining. 

Q29. What Is Use Of Sketch Analysis?

To test whether or not the comic strip is completely closed or now not so that the cartoon may be used or no longer so that the cartoon can be used for further operations in element design.

Q30. Which Are The Neutral File Extensions We Caii Use For The Part File?

IGES/igs, STEP fstp, STL, WRL, and many others 

Q31. Can Axis Be Converted Into Line Or Vice Versa?

We can convert line into axis but axis can not convert into line. 

Q32. Is It Possible To Hide Specification Tree?

Yes, with help of F3 button, but the alternative in Tools conunand must be checked to permit this. 

Q33. What Are The Different Options Available In Quick Trim Command?

BREAK & RUBBER in removes part of the element, that's clicked. 

BREAK & RUBBER out eliminates part of the detail, which isn't always clicked. 

BREAK & KEEP keeps both components of elements after breaking. 

Q34. What Is Use Of Construction Elements?

Construction factors assist in sketching the specified profile in sketcher.

 

Q35. How Do You Create A Negative Polarity Body In Part Design?

After placing a new frame If you operate Negative feature as fist function in a frame the polarity of the body might be negative. Negative features like Pocket, Groove, Slot Hole and many others. 

Q36. Can You Create A Block Using A Line/is It Possible To Extrude A Line Or Open Profile Using Pad?

Yes, ou can create a block the usage of line, while you are extruding a line or any open profile you may test thick option in Pad feature (to keep away from Error message). You can Give restrict one, Limit Two and Thickness one and two. You will get Block from line and skinny sheet from any open profile. 

Note: Dont use this selection to create a sheet metallic element the usage of element layout. 

Q37. What Is The Alternate Option For Intersect Boolean Option?

Solid Combine is alternative option for Intersection Boolean operation. 

Q38. Is It Possible To Increase The Size Of Plane Boundary Representation & How?

Yes, go for Tools-Options- Infrastructure-Part structure-Display.