Interview Questions.

Q1. Which Movement Types Refer To Inspection Origin 05?

You need to test the T156S-QSSHK. It indicates the inspection lot origin for all movement types.

Q2. I Want To Post The Stock From Quality Inspection To Unrestricted Use Partially With Two Ud Codes For Same Inspection Lot. But The Qga2 System Will Show The Total Document Posted On Only One Usage Deci

You ought to use inspection points and partial masses. In this manner, you could have a one-of-a-kind UD for inspection points and inventory posting therefore.

Q3. I Need Some Guidelines In Maintaining The Settings For Batch Management In Qm. What Are The Customizations Necessary For Batch Management From Qm Point Of View? How The Inspection Lots Get Triggered

The hyperlinks should do along with your configuration of batch control on your fabric. If the substances in query are batch managed and are purchased or synthetic within your employer when the material is acquired using the 101 motion kind, the batch is created and assigned in the heritage to the inspection lot.

Depending on how you've designed your inspection plan or material specification, you can construct the master inspection characteristics, depending on class traits, a good way to reproduction the inspection outcomes into the batch record.

This is much less QM configuration than it's miles MM-Batch Management configuration and cloth master definition.

Q4. I Know It Should Be Possible To Attach Files, Pictures Etc. When Creating Notifications. However, I Am Working Right Know In An Automotive Release And Cannot Find The Button Anymore. Did We Miss Somet

Check what kind of consumer you have got installation. Sometimes the safety guys installation a trying out ID as a unique kind than a everyday person. Some ID types do not have the capacity to apply the Object services capability.

Q5. In The Inspection Plan I Have A Characteristic With Upper Limit. In Which Table Can I Find This Value?

Look at table PLMK. If it's miles a reference MIC, additionally check QPMK. These are for checking the plan. The Inspection Lot maintains them in different values.

Q6. I Am Having 3 Different Operations. The 0020 And 0030 Operation Is Dependent On The 0010 Operation. It Means That Once The Rr Is Done For Operation 0010, Manual Ud Has To Be Taken Immediately. Then Re

You should use Inspection Points for 0010 (it has its own UD) and then use the Inspection Lot UD for the entire manner.

Q7. How Do I Use Material Specification? If I Want To Use Material Specification, What Are The Things I Should Do?

To use Material specification you want to have:

Class Characteristics;

MIC's linked to the Class Characteristics;

A Class containing the Class Characteristics, assigned to the Material Master;

Material spec maintained. (QS61);

Limit values for the characteristics, maintained within the classification view inside the fabric master;

Inspection with material specification chosen inside the inspection type in the material grasp.

Q8. I Want The System To Take My User Name As Default For Partner Ao Author While Creating A Notification. I've Created The Partner Determination Profile And Assigned It To The Notification But It Is Not

I anticipate which you have an organisation for the companions. I assume you want to make use of workflow and perform a little coding.

Utilize the user ids. Use the KU for coordinator considering that it's far for the person, and KO is for the individual which calls for HR. When a Q3 based totally notification is created the coordinator might be defaulted. But as I said, it requires business enterprise, workflow and some coding.

Q9. I Have Activated 04 Inspection Type With Post To Inspection Stock For A Material. I Have Left Qm Not Active Unchecked For one zero one Mvt Type For Mvt Indicator F (gr For Order) In Omjj. While I Am Doing Gr

If the system order was created after you changed the material, then it is an "vintage" process order, and this may explain the error. If there has been an current inventory of this fabric earlier than you start, then try this first with a newly created cloth. Afterwards, the error you describe ought to not happen.

Q10. I Have Created Some Certificate Profiles That Need To Be Deleted. But They Are All In Released Status. I Know That Certificate Profile Cannot Be Deleted If It Is In "rel" Status. How I Should Deal Wit

It appears to me you could doubtlessly block the profile - from within the profile, edit -> block profile. Once it is blocked, you could proceed with the deletion.

Q11. Is It Possible To Make The Inspection Lot Quantity To (1) All The Time? Can It Be Configured As An Automatic Default In Qa01? If Yes, What Are The Steps Necessary To Make A Sample Size Default Every T

If you're relating to the Sample Size the answer is sure.

If you're referring to the Lot Size, then the answer is not any.

For the lot amount, you may use a sampling method of type constant and assign the scale to one.

Q12. Where Does The System Store Mic Long Text History? When I Tried Using, 'read_text Function Module', The System Is Fetching Only New Long Text. How Do I Fetch The Old Long Text Of Mic?

The device does now not shop the lengthy text records, because it is a textual content. To hold the lengthy text, create MIC with the best versions and assign MIC inside the undertaking listing as in keeping with the required version. The placing is in customization for the plant stage, MIC with records.

An alternative recourse is to test out AUT1@You want to set it up, but it permits you tune changes to any Long Text. I trust it's miles to be had from 4.Five or 4.6.

Q13. How Do I Populate Additional Entries Directly Into The Tables? Is There Any Direct Way To Populate Fields In The Tables?

It relies upon on which tables you're speaking approximately due to the fact a few tables can be directly maintained in PRD. For some you have to transport it maintaining in DEV machine. For instance, number ranges are not transportable. You need to keep it directly in each example.

If you're speakme approximately mass maintenance, Standard SAP QM does not have it with the aid of now. You can talk to your developer to write a software for you by way of which you may do a mass protection. Otherwise SM30 is ideal sufficient to run.

Q14. Can Somebody Explain To Me How A New Posting Proposal Can Be Added In Order To Use This In The Catalog Assigned To A Ud Code? There Is A New One But Won't Be Available (vmenge01) Until 200

Try the customizing course Quality Management -- > Quality Inspection --> Inspection Lot crowning glory -- > Define inventory postings.

Q15. We Have Two Inspection Lots For Which Ud Has Already Been Done. Later On We Realized That These Lots The Sample Size Was Not Calculated. Now We Want To Reset The "sample Calculation" But Not Able As T

Under normal circumstance, a UD can not be reversed.

Q16. The Deletion Flag On Production Order Was Set But Had To Be Revoked To Allow Further Goods Issues. Issues Have Now Taken Place But In Trying To Reset The Deletion Flag, The Following Error Message Occ

You're normally now not allowed to mark a Production order for deletion as long as the economic fee on the order isn't always zero and/or you have substances posted to it.

I can't see the point in deleting an order with postings. That manner you would probably mess up both logistics and accounting.

Q17. I Have A Requirement From A Client For Inspection Of A Material For Different Vendors. Characteristics Change From Vendor To Vendor. Automatically , The Inspection Plan Will Need To Be Selected Based

In the fabric to plan challenge, scroll to the proper and you'll see a vendor column. If you placed a seller wide variety in that column, this is the plan a good way to be selected for the material/plant/vendor.

Q18. When I Try To Upload Data With Lsmw To Create Inspection Plan, The System Shows The Message: "bdc_open_group, Lock Date./. Is Invalid". I Have Bdc Authority, So What's The Problem?

Did you input a date for field START in structure BI000? The date needs to be in advance than cutting-edge date.

The queue start date specifies the day until which a batch enter folder is locked. You can not manner a locked batch input folder till the day after the required date.

Q19. I Am Doing Quality After Doing Migo Mvt Type 10

You can use the list display transaction code QE51N and within the EXCEPTION standards you could specify it to be ‘UD Not accomplished’.

Otherwise in the identical transaction code QE51N in the output columns, you can show the column "Usage decision by way of" and sort via it so that the clean ones are at the pinnacle. Those blank ones are the lots for which UD turned into no longer finished. Once you find out the lot numbers you can open the lot and spot the order range in it.

Q20. I Need To Change The Status Of A Lot Based On Certain Conditions And Looked At Qfpo_post_status_for_lot But This Didn't Return Anything. I Need The Status Of The Lot To Be Insp Rrec So That I Can For

In standard, forcing a alternate to the device reputation isn't a superb idea. Instead, you have to don't forget using a user fame. If the device repute isn't RREC then, there can be no consequences to duplicate.

Q21. I Would Like To Know Where The Batch Status Can Be Set In Sap. We Have The Stock Type Q For Quality Inspection. We Would Like Stock Type R For Rework And S For Blocked. Where Can This Be Set In Sap?

There isn't any manner to create a new reputation. The simplest factor you could do, if you have Batch Management, is to activate the Batch repute so that you could have Unrestricted (blank), Quality (Q) and Blocked (S). Having these batch statuses, you could replica all shares to restricted Q, clean and S.

Q22. In Our Plant, Gr For A Material Was Made Three Months Back. This Material Is Qm Managed. The Quality Plan For This Material Was Made This Month Only. Hence Our Qm Personnel Are Not Able To Clear This

You can reset the Sample Calculation and Recalculate the change in Start & Inspection end date in QA02.

In QA02 you can also alternate the key date on the second tab so it seems for a plan on that date. If that plan has already been created, you can then exchange the key date to the contemporary date and it will locate the plan.

Q23. Is There A Way To Create Inspection Lot Programmatically In An Abap Report? Is There Any Business Object, Function Module Or User Exit? We Went To 1 Lot For 1 Shift. We Use Inspection Origin 89 (manua

Automatic introduction of Inspection lot in SAP is ruled via Inspection lot foundation, inspection type, and so forth.

You have to give the info of why you need an inspection lot advent with the aid of program or ABAP document.

Instead, you could use a report /program to do it. Standard SAP offers this capability.

If it's miles in--procedure inspection, you may use inspection factors based on shifts.

Q24. I Was In The Process Of Testing The Scenario Of Skip Lots. I Have Done All The Data Maintenance In The Material Master And The Dynamic Modification Rule. The Quality Level Is Getting Updated To A Skip

This may be done by using setting the Control Inspection lot indicator in the QM view of the fabric grasp to every material report.

Iit works for DMR at lots and feature degree.

Q25. While Rr For Some Of The Mic's, The System Is Asking For Manual Valuation And For Some It Is Not Asking. I Want The System To Ask Manual Valuation For All The Mic's. What Settings Should I Do To Get T

Check your Valuation Mode / Sampling Procedure. From there, you could find the settings had to configure your requirement.

Q26. I Could Not Create Return Delivery For A Material. The Message Display Is:

'could Not Create Return Delivery Wm Movement Type 102 Not Allowed For Warehouse No. 010'. How Do I Fix This Problem?

Check in the configuration. The message clearly says that for the Warehouse no. 010 you haven't allowed motion type "102".

You should change this configuration and add a line or move the stock to a warehouse where customer returns are allowed.

Q27. How Do I Transfer The Results From One Origin To Another Origin?

This can be carried out with the aid of growing a application attached to the comply with up features for the UD code. Once the UD is done the outcomes can be transferred from lot to lot

Q28. I Am Using Exit Mm06l001 (function Module- Exit_sapmm06l_001) For Quality Criteria. The Scores Of The Sub Criteria Are Calculated On The Basis Of Quality Notifications And Inspection Lots. But No Scor

Regarding high-quality notification, do affirm the subsequent:

Notification completed with External foundation.

Invoice verification already took place.

As for inspection lot, confirm that utilization choice has been made. In addition, confirm customization of all required parameters (as indexed in documentation underneath QM->Quality Control->Vendor Evaluation).

Q29. I Have Executed Massive Automatic Usage Decision Via Qa16 And Noticed That No Stock Postings Been Updated. The System Noted The Usage Decision But Didn't Carry Any Goods Movements. Why Were The Stock

You must make sure that the UD codes you operate have the automatic postings setup for it. The decided on set code desires to be set for heritage postings and what cloth popularity it ought to post to. Take care of those and it'll cope with the troubles.

Q30. Is It Possible To Cancel The Inspection Lot Once It Has Been Created?

You can cancel it through reversing the transaction that created it.

It's also viable to go into the inspection lot in Chance mode and set the popularity to “locked”. It will then disappear, but if there's QI stock linked to it you might not get it out.