Interview Questions.

Q1. Explain What Will You Do When Your Timed Schedule Or Jobs Assigned To The Plant Fail To Meet Due To Some Unforeseen Forecast Conditions?

This takes place normally on each other day on this career, but the key isn't to live returned but circulate on. I will take some preventive measures to keep away from loss of sources.

Q2. Tell Me Which Eicas Message Indicates That Actual Thrust Is Significantly Less Than The Commanded Thrust?

ENG THRUST (L or R). FCOM 1 70.20.16

Q3. Do You Know What Is Lock Out Tag Out?

It is a process that is used for the protection of the people and the equipments in the course of the renovation or restore of the energy plant.

Q4. Explain Why Is A Block Of Coal Crushed Into Powder Before Burn?

A block of coal takes numerous time to burn and provide out the power, however the powdered coal burns uniformly faster and considering the fact that it's far in its powdered form the entire coal burns and there's no waste of coal which leads in reaching greater calorific value.

Q5. Tell Me Which Rotor Vibration Is Most Likely To Cause Tactile Vibration?

N@FCOM 1 70.2016

Q6. Do You Know What Are The Secondary Engine Parameters?

N2, N3, gas drift, oil stress, oil temperature, oil amount and engine vibration. FCOM 1 70.20.1

Q7. Tell Me What Is The Amount Of Energy Out Of The Total Energy Produced That Is Taken Away By The Boiler Feed Pump?

A boiler feed pump takes away one third a part of the electricity generated with the aid of the strength plant.

Q8. Tell Me What Things Are Missing From A Natural Gas Power Plant To A Coal Power Plant?

CHP & stock backyard, crushers, coal conveyors, wet or dry ash disposal, ash slurry disposal gadgets, ash pond, LDO HFO oil elevations.

Q9. Tell Me Have You Ever Come Across A Situation When The Plant Went Into Some Technical Issues, How Did You Manage That?

Technical problems are very commonplace in a plant, provide an instance from your beyond experience where you effectively managed to triumph over a technical problem.

Q10. In Water Tube Boilers Are?

Water passes through the tubes which can be surrounded via flames and hot gases

Q11. The Object Of Producing Draught In A Boiler Is?

To offer an ok supply of air for the fuel combustion

to exhaust the gases of combustion from the combustion chamber

to discharge the gases of combustion to the environment through the chimney

Q12. Tell Me When Is The Auto-relight Function Activated?

When ever an engine is at or below idle with the gasoline manage transfer in RUN. FCOM 1 70.20.8

Q13. Do You Know How Many Ignitors Are Used For In Flight Starting?

Dual ignitors are constantly used for in flight begins. FCOM 1 70.20.8

Q14. Explain The Abilities You Have In Order To Work With Us As A Boiler Operator?

I'm acquainted with the boiler operation, I changed into skilled to restore and set up boiler. I am a good problem shooter and a good operator.

Q15. Explain When Is A Crossbleed Start Indication Displayed Next To The N3 Indication?

If the airspeed is beneath that advocated for a windmilling begin. FCOM 1 70.20.7

Q16. Explain How Important Is Safety To You?

Safety in this career is very important for every worker working in the plant. A small mistake can result in a large chance and subsequently each minor hazard of a mistake have to be taken seriously.

Q17. Tell Me Who Is A Power Plant Operator?

A strength plant operator is someone who operates a strength plant. He has were given to be precise at the technical talents of using the energy plant and need to be equally gifted in distributing the paintings to the opposite people who are running with the electricity plant.

Q18. Tell Me What Can You Do To Drive The Blades Of The Turbine Faster And Preventing The Damage Of The Blades?

Steam ought to be heated to the temperature it's far earlier than making it to enter the turbine because superheated steam produces a variety of strength and additionally prevents the blades from rusting or destructive.

Q19. Explain What Is The Difference Between An Induced Draft And Forced Draft?

Forced draft installed to pressure the air inside the plant while the precipitated draft fetches and pulls the air inside the air.

Q20. Do You Know In Flight, How Many Attempts Will The Autostart Perform?

The autostart will make continuous start tries until the engine either starts or the pilot aborts the start strive. FCOM 1 70.20.7

Q21. Explain What Are The Primary Engine Parameters Displayed On Eicas?

EPR, N1 and EGT. FCOM 1 70.20.1

Q22. Explain When Will The Engine Fail Message Appear On The Pfd?

If real thrust is much less than commanded thrust at some point of takeoff with airspeed between 65kts and V1-6kts. FCOM 1 70.20.Sixteen

Q23. Explain And Convince Me That You Can Adapt To A Wide Variety Of People, Situations And Environments?

Swithching from oil to propane.

Q24. Tell Me After The Production Of Electricity, Why Do We Increase The Voltage Before Sending It To The Grid?

To keep away from the trmission losses.

Q25. A Grate, In A Boiler, Is A Place In The Combustion Chamber Upon Which Fuel (wooden Or Coal) Is Burnt.

True

Q26. Tell Me What Do You Feel Is An Acceptable Work Attendance Record?

Safety pushed and self directed, I can and do work with minimum supervision and continually put my plant and co- people protection exceptionally else.

Q27. Do You Know And Can You Comment Why Some Cooling Towers Are 300 Feet Tall And Others Are Like 30x30 Cubicle On Top Of A Building?

It depends at the type of plant and the application the tower has to deal with it.