Interview Questions.

Q1. Length Of Cat5 Trmission?

100m.

Q2. What Is The Name Of The Ethernet Plug?

RJ45

Q3. Name Two Devices Needed To Make A Network?

Switch and router (properly, network card (NIC) and router have to do it, or a transfer and network card.. Depends how large you need to make it, definitely i bet you can have a network with a crossover cable and  nics).

Q4. What Is The Difference Between Pcie And Pci?

PCI-e is more recent than PCI and PCI-x. The slots look special and they may be no longer well matched.

Q5. What Does Http Stand For?

 Hypertext Trfer Protocol.

Q6. How Do You Recognize A Broken Hard Drive Without Software Or Removing It From The Machine?

Noise (tick tack sound of the arm getting stuck/hitting something)

Any leds on the disk, gadget board, controller

Any vibration or whatever from the disk?

Q7. How Many Primary Partitions Can You Have In Dos?

Four number one and most one lively per disk. See this hyperlink for a few factors. Unsure at this level what the exact question become.

Q8. What Is The Resolution In Windows 2000 Safe Mode?

800×600 or 640×480?- see this hyperlink on mydigitallife or this publish on tom’s hardware.

Q9. What Are All The Components In A Pc Or Server?

PC: chassi, gadget board, psu, cpu, ram, hdd, f, cables, snap shots card, dvd, monitor, keyboard/mouse

Server: identical with deduction of a more graphics card (is one on the machine board), and addition of hdd controller, likely backplane, no cd/dvd, more nic, double cpu, ram, psu, f, far flung tracking/console.

Q10. How Many Ide Devices Can You Have In A Pc?

Two in step with channel (normally 4)

Q11. What Is The Bit Rate Of A Serial Interface Of A Network Device?

The default reputedly in hyperterminal – 9600 (this is probably difficult, in my enjoy this varies between the devices – max might be 115200bps). Maybe what they're soliciting for is what's the default velocity of a Cisco transfer’s aux or console port? If so, the wer is 9600.

Q12. What Is Bios?

Basic input/output system. Responsible for initializing hardware, POST/startup diagnostics, boot the OS and varies hardware settings.

Q13. How Many Can You Have On Each Channel? What Are They Called?

2 / master and slave

Q14. What Is Rom?

Read Only Memory – Used for storing data which you do not want anyone to write to.

Q15. What Is The Port Used For Http?

Eighty

Q16. What Protocol Is Used By Ping?

ICMP (this is a sneaky query – an apparent fault is to head for TCP or UDP)

Q17. How Do You Find The First Disk In A Linux Os?

Look beneath /dev/ for a disk like /dev/sda(SATA) /dev/hda (PATA). Then /dev/sda1 is the first partition.