Interview Questions.

Question 1. Is There Any On/off Switch Present In Keyboard And Mouse? 

Answer : 

As far console as worry ON/OFF switch not present yet you can wake up console by squeezing num lock when it is in rest mode. 

Mouse has an inbuilt ON/OFF switch, which is available in rear of the mouse. 

Question 2. When Dongle Is Connected My Keyboard Is Working And Mouse Is Not Working? 

Answer : 

The item may require a new synchronization, if it's not too much trouble follow the beneath steps. 

MOUSE – When you embed a battery in mouse it will begin with red shading LED squinting and get off in 2-3 seconds, it would be ideal if you press and hold scroll catch and right snap button for 2-3 sec when green LED begins flickering , please discharge the catches and supplement the dongle in USB port. 

Console – When you embed a battery on console space green LED in front will begin squint for 1-3 sec and stops, later please press interface button while you embeddings dongle with a long green shading LED flicker it will begin blending with the dongle. 

TCS Technical Interview Questions 

Question 3. The Covering Distance Of My Mouse Is Very Poor? 

Answer : 

In the event that battery is feeble this may occur, if it's not too much trouble supplant your battery with new one. You can utilize combo gadget inside 9M. 

Question 4. Mouse Is Not Working But Led Is Blinking? 

Answer : 

Press and hold scroll catch and right snap button. 

Addition battery when you leave the hold off parchment and right snap (Releasing the keys and embeddings the battery must be on a similar time immediately) 

At the point when you complete stage 2 mouse will begin flickering on that time please embed dongle in to USB space. 

Question 5. How To Switch Between Different Led Modes? 

Answer : 

Press "FN" + "INS" - 4modes. ( Modes can be exchanged by squeezing this blend once more.) 

Press "FN" + "HM" - 4modes. (Modes can be exchanged by squeezing this blend once more.) 

Press "FN" + "PU" - 4modes. (Modes can be exchanged by squeezing this blend once more.) 

Press "FN" + "DEL" - 4modes. (Modes can be exchanged by squeezing this mix once more.) 

Press "FN" + "PD" - 4modes. (Modes can be exchanged by squeezing this mix once more.) 

Press "FN" + "END" - 1modes. 

Wipro Technical Interview Questions 

Question 6. Is It Possible To Program A Key In "fn" + "end" Mode ? 

Answer : 

Indeed, Press twice "FN+END", the Keyboard will go into arranging mode. (NUM LOCK, CAPS LOCK and SCROLL LOCK LED will flicker constantly.) 

Press the keys for which you need the LEDs ON/OFF. When you have done, Press "FN+END" again to leave this mode. 

Question 7. How To Increase/decline The Brightness Of The Led? 

Answer : 

Press "FN" + "Up/down bolt key" - to change the LED splendor alteration. 

Infosys Technical Interview Questions 

Question 8. How To Increase/decline The Blinking/activity Speed Of The Led? 

Answer : 

Press "FN" + "- " - to Decrease the squinting/liveliness speed of LED 

Press "FN" "+" - to build the squinting/movement speed of LED. 

Question 9. Step by step instructions to Shift Led Movement From One Direction To Other ? 

Answer : 

Press "FN" + "Left/Right bolt key" - to move the directed light from Left to right or Right to left. 

Apple Technical Interview Questions 

Question 10. How To Lock The Windows Key? 

Answer : 

Press "FN" + "Windows keys" - to bolt the WINDOWS key capacity, press again to open. 

Question 11. Is It Possible To Program The Backlit For Keys In Max Pro ? 

Answer : 

Indeed, beneath is the point by point manage for the equivalent 

Press twice "FN" + "~", the Keyboard will go into designing mode. (NUM LOCK, CAPS LOCK and SCROLL LOCK LED will squint persistently.) 

Presently press "FN"+ "RIGHT KEY", to change the chose shading. The illuminated hues will change in following request - 1.Red 2.Orange 3.Yellow 4.Green 5.light blue 6.Blue 7.Violet 8. White 9. Off.The chose illuminated shading will be noticeable in "~" key. 

To spare the designed mode, press "FN" + "~" key by and by. 

This custom shading illuminated will be spared in any event, when console is separated, you can choose this custom shading illuminated by squeezing "FN" + "~" key once. 

Question 12. How To Change The Led Colors? 

Answer : 

Press "FN" + "Right bolt key". 

TCS Technical Interview Questions 

Question 13. How To Change Fm Mode And How To Scan/spare Channels? 

Answer : 

Turn on the gadget utilizing force and volume button. 

Press reset button once. 

Press check button once. 

Accessible range FM channel will be checked and spared consequently. 

Subsequent to checking, squeezing the output catch will permit you to change FM channels. 

Question 14. Where Did Battery Socket Located In Headphone? 

Answer : 

Earphone - On the left half of earphone is having the battery attachment, it would be ideal if you cut down the dull earthy colored shading top to open and find battery. Requires two AAA batteries. 

Transmitter - On transmitter battery attachment situated in base of the unit. Requires AAA batteries. 

Question 15. How To Connect Transmitter With Desktop/PC/tablet/portable Etc? 

Answer : 

If you don't mind utilize the packaged AUX link (3.5mm on one side and two RCA female on another side) and associate RCA end with transmitter and interface 3.5mm (Stereo) end to the gadget you wish to associate. 

Question 16. What Is Monitor Feature And How To Use? 

Answer : 

This mode utilized for voice catch, you can keep transmitter in screen mode on one work area and can hear voice through earphone up to separation of 10m (Without any interference) 

Turn on transmitter and earphone 

Set transmitter on screen mode 

No more association required (Cable free) 

Get transmitter signal on earphone by squeezing check button. 

Question 17. Step by step instructions to Connect A Mobile For Wireless Music ? 

Answer : 

At the point when the speaker is in remote mode, scan for close by BT gadgets in your portable. Tap the name "ZEB-PUNCH" and interface it.(Password - 0000, whenever provoked). 

Question 18. What Are The Different Modes In Zeb-punch ? 

Answer : 

BT Wireless/Micro SD/USB/FM/AUX mode. 

Wipro Technical Interview Questions 

Question 19. How To Tune Fm Channels? 

Answer : 

Change the speaker to FM mode. 

Interface the AUX link to the AUX port of the speaker and leave the opposite end free (this link will go about as a FM reception apparatus). 

Press the Play/Pause button once to begin checking the FM channels. 

when the checking is done, the speaker will begin playing from first spared channel. 

To change the channels you can use Next/Previous catches. 

Question 20. What Are The Different Led Indicators? 

Answer : 

Red LED shining - Charging 

Red LED kills - Fully energized. 

Question 21. How To Decrease/increment The Volume Level? 

Answer : 

Press "-/+" to diminish/increment the volume level individually. 

Question 22. How To Use Usb/msd Card? 

Answer : 

When a USB/mSD card is embedded into the speaker, it will distinguish the USB/mSD card naturally begin playing the melodies from it. 

Question 23. What Are The Different Modes In Zeb-oliver? 

Answer : 

BT Wireless/Micro SD card/USB/FM/AUX. 

Question 24. How To Scan Fm Channels? 

Answer : 

Change the speaker to FM mode. 

associate the AUX link to the AUX port of the speaker and leave the opposite end free (this link will go about as a FM recieving wire). 

Press and hold the Play/Pause catch to begin examining for FM channels. 

When the examining is done, the speaker will begin playing from first spared channel. 

To change the channels you can utilize +/ - catches. 

Infosys Technical Interview Questions 

Question 25. How To Use Usb/miniaturized scale Sd Card? 

Answer : 

When a USB/Micro SD card is embedded into the speaker, it will identify the USB/Micro SD card consequently and begin playing tunes from it. 

Question 26. How To Pair The L and R Speaker With Each Other? 

Answer : 

Turn ON both the JIVE speaker and Press and hold the Play/Pause key of any one speaker to match both the speaker together. Sound notice is incited once effectively associated. Both the speakers can likewise be separated by long press the Play/Pause key of any one speaker once more. 

Question 27. How To Pair Both The Speaker To A Single Mobile To Stream Wireless Music? 

Answer : 

When both the speakers are associated with one another with the assistance of the above advance, Scan and find "ZEB-JIVE" speaker on your gadget. Tap on "ZEB-JIVE" to interface (Password-0000, If provoked). 

Apple Technical Interview Questions 

Question 28. How To Pair L and R Speakers Individually With Two Different Mobiles? 

Answer : 

Disengage the L and R association of the speakers (If both the speakers are associated with one another) by long squeezing the Play/Pause key of any one speaker. Sound notice is provoked once effectively detached. Presently both the speakers can be associated independently to two distinct gadgets. 

Question 29. How To Use The Speakers In Aux Mode? 

Answer : 

Interface one finish of the 3.5mm jack link to the sound source Connect different closures (flip side parts to two 3.5mm jack) of the link to both the speakers. 

Question 30. How To Connect The Mellow Speaker To An Audio Source? 

Answer : 

Interface the USB of the speaker to a Powered USB port. (Through USB port or PC/Laptop or DC 5V connector) Plug the 3.5mm jack to the sound source. 

Question 31. What Is The Purpose Of The Given Controller? 

Answer : 

With the assistance of the controller, Mellow can be work in different modes. (i.e Bluetooth,FM,USB and SD modes).

Question 32. Utilizing The Controller, How Can We Connect Mellow Wirelessly Via Bt? 

Answer : 

Interface the USB of the speaker to a Powered USB port. (By means of USB port or PC/Laptop or DC 5V adapter)Plug the Micro USB to the controller and the opposite finish of the smaller scale USB link to a Powered USB port. (Through USB port or PC/Laptop or DC 5V connector). 

Plug in the 3.5mm jack of the speaker to the controller. 

At the point when the controller is in BT mode, look for close by gadgets in your portable. 

Tap the name "ZEB-MELLOW " and interface it. (Secret phrase - 0000, whenever provoked). 

Question 33. Utilizing The Controller, How To Tune Fm Channels In Mellow? 

Answer : 

Interface the USB of the speaker to a Powered USB port. (Through USB port or PC/Laptop or DC 5V adapter)plug the Micro USB to the controller and the opposite finish of the small scale USB link to a Powered USB port. (Through USB port or PC/Laptop or DC 5V connector) 

Plug in the 3.5mm jack of the speaker to the controller. 

At the point when the controller is in FM mode,Press the Play/Pause button once to filter the accessible FM channels. 

When the filtering is done, the speaker will begin playing the principal channel. To change the channels utilize the following/past catches on the controller. 

Question 34. Utilizing The Controller, How To Play Songs Via Usb Pendrive/sd Card? 

Answer : 

Interface the USB of the speaker to a Powered USB port. (By means of USB port or PC/Laptop or DC 5V adapter)Plug the Micro USB to the controller and the opposite finish of the small scale USB link to a Powered USB port. (By means of USB port or PC/Laptop or DC 5V connector) 

Plug in the 3.5mm jack of the speaker to the controller. 

Supplement a Pendrive/SD card to the controller 

The Controller will recognize the Pendrive/SD card and begin playing the accessible sound substance in the pendrive/SD card.