Interview Questions.

Question 1. Cannot Connect Using Serial Cable: Test Your Cable And Ports?

Answer :

Here is a whole manner for trying out your serial cable. Most serial direct connect issues that result in a "serial cable disconnected" "can't connect to host computer" are associated with an fallacious cable, or troubles with the laptop's serial ports. 

Question 2. Can I Use Direct Cable Connect To Share An Internet Connection?

Answer :

Special software is required for home windows 95 to path the net connection throughout direct cable connect. Messages at the net are sent to the IP cope with of the pc related to the internet. A proxy server is needed to do a unique translation of those message addresses and course them efficiently across the direct cable hyperlink. This is a complicated utility requiring smart understanding of internet protocols and local networking. One proxy server referred to as Wingate is availiable for this feature as a shareware down load (an evaluational version is availiable.)

You first will need to put in the dial-up networking package model 1.2 on the host so that dial-up networking and direct cable join can function on the equal time.

The ever growing list of home windows internet proxy servers, select from one of the following:

Wingate the primary credible proxy human beings (unfastened <2 users).
Winproxy by way of sits software program (US$49 <5 users).
Microsoft (US$500-900)
Netscape-Sun Alliance (US$500)
WinRunner Interview Questions
Question 3. I Am Having Trouble With A Parallel Connection. It Displays "verifying Username And Password" Then Aborts?

Answer :

More information can be found at the Parallel Technologies FAQ Page. If you have followed the directions of the DCC parent page, you may be having trouble with your parallel port settings. Both must be configured for the same type ECP, BI-Directional etc. These settings are controlled by the bios or your system, or perhaps the configuration of your parallel interface.

I suggest giving this diagnostic program a shot at figuring out your system and cable configuration problems (it only is beneficial for parallel connections). Parallel Technologies ftp site may be seen here.

Question 4. I Am Having Trouble With A Serial Connection. It Displays "cannot Connect To Host Computer"?

Answer :

Check your baud rate for both serial ports in use. If they are correct, continue to examine the other suggestions on this page.

WinRunner Tutorial
Question 5. I've Tried Everything On The Page And It Still Doesnt Connect. I Get Messages Like "cannot Connect To Host Computer", "parallel Cable Disconnected"?

Answer :

V4.00.950 & V4.00.950a of windows 95 may not connect due aparently to a problem in the password lists. One solution is to load the "a" version of communications from the newer CD. Using windows 95 explorer, click Tools-Find-Files or folders and search on 'My Computer' for all copies of "directcc.Exe", repeat the procedure on both computers.

For the computer with the oldest dated "directcc.Exe", rename the file "directcc.Exe.Old" and copy the newer version onto that computer using a floppy disk (Be sure you are not transferring a virus from the donor computer). If unsure of the virus condition of the newer version, you may extract "directcc.Exe" from the appropriate .Cab file (use browse CD in the auto-run function to locate it).

MS-DOS Interview Questions
Question 6. What Is The Speed Difference Between Serial And Parallel?

Answer :

Parellel is sending 8 bits at a time and serial one. There is some overhead in the parallel port which results in an aproximate 5x faster connection for parallel.

Question 7. Can The Baud Rate Be Set For Dcc Serial Connections?

Answer :

Yes! In control panel, click on System. Select the device manager tab and select the modem category. An entry for the com port you are using should be apparant. Adjust this speed to the fastest the two computers can operate. The system/port setting also should be set to at least the speed you are selecting; see also "The Need For Speed."

Microsoft Azure Tutorial Red Hat Linux System Administration Interview Questions
Question 8. Is There A Command Line Option To Bypass The Connect Dialoge For Dcc To Start Automatically?

Answer :

IFF direct connect was configured as HOST the last time it was run, then adding anything after the executable name in ths shortcut "c:windowsdirectcc.Exe connect" will cause the application to start up in host mode bypassing the user input box. This does not work in guest mode.

There is also a utility that works perfectly for this called DUNCE. There is a shareware fee associated with this program if you are not affiliated with a university. This utility is also excellent for automating windows 95 dial-up networking!

Question 9. How Far Can Dcc Operate?

Answer :

If you are asking this question, I am concerned the computers will be in different rooms. Be sure there is no current flow between the grounds of your computers! This is especially previalent in industrial/office locations. A small voltage of 5vAC can be in current levels in excess of 10amps. Since the grounds between computers are not fused, the possibility of fire exists.

Serial connections can operate in excess of 50meters, parallel 20. This will depend upon the type of wire, and electrical noise. Do not use sheilded wire, and keep the gauge relatively small to avoid capacitance.

Windows XP Interview Questions
Question 10. Ecp Port With Smc Chip Set Does Not Transfer Data Properly?

Answer :

Direct cable connect may not operate correctly, loosing data. You must re-configure the port as a different style. This problem has been noted on the following computers:

Hewlett-Packard (HP) Vectra
Windows Presentation Foundation(WPF) Tutorial
Question 11. Do Both Computers Need To Have The Same Workgroup Name?

Answer :

No. I have connected two computers with differing workgroup names. Each can find the other and share files.

Windows8 Interview Questions
Question 12. Direct Cable Connection May Not Work In Localized Osr2?

Answer :

When you are running certain localized non-English versions of Windows 95 OEM Service Release 2 (OSR2) or OEM Service Release version 2.1 (OSR2.1), attempting to use Direct Cable Connection to connect two computers may not work. You may receive an error message stating that the port is not available. 

WinRunner Interview Questions
Question 13. How Do I Set The Ip Address For My Computer?

Answer :

If you are using dial-up networking, it is probable the IP address is allocated (dynamic) each time you log in. In this case your address may be determined by the name "localhost" or using the program located in the windows directory named: WINIPCFG.EXE. 

In windows 95 you can set your IP address by going to the control panel-network Configuration and TCP/IP Adapter. In the properties there is a tab called IP Address. You can "Specify" an IP address there.

Windows Communication Foundation (WCF) Tutorial
Question 14. Can't See A Cd Rom/some Volumes Do Not Appear?

Answer :

Using Windows Explorer, Select the Device that does not apear across the link. Click File-Properties and select the Sharing tab. The selection should show Shared As "Resource Name", also Read Only or Full Access Should be displayed. 

Note: A reader has reported that they had to change the permissions to Not Shared, close windows, and then select shared again to clear a password that was in effect for a device even though the panel did not display any password is required.

Question 15. Can Only See The Other Computer One Way?

Answer :

Many people have encountered this problem, and many factors can cause it.

Be sure something is shared on the computer that is not visible on the link.
It could be the case that dial-in connections are disabled on the host that will not allow connections, see the main page on using policy.
The File VREDIR.VXD may be damaged. See KB article #159578.
Consider reviewing the setup procedure for the invisible computer.
Make sure the Network Neighborhood Icon is visible on the desktop of the invisible computer.
Microsoft Azure Interview Questions
Question 16. I Cannot Find A Driver For My Printer. Do Microsoft Windows 3.1 Printer Drivers Work In Windows 95 And Windows 98?

Answer :

Yes. Windows 3.1 printer drivers should work in Windows 95 and Windows 98; however, they cannot use all of the printing enhancements in Windows 95 and Windows 98.

You may be able to obtain a Windows 95 or Windows 98 printer driver from the printer manufacturer. Contact the printer manufacturer about a possible printer driver upgrade.

Windows Server 2012 Tutorial
Question 17. I Cannot Print In Windows. What Should I Do?

Answer :

Windows includes a Print Troubleshooter tool. Before you perform any troubleshooting steps, try the Print Troubleshooter tool. To use the Print Troubleshooter tool:

Click Start, then click Help.
On the Contents tab, double-click the Troubleshooting topic.
Double-click the If You Have Trouble Printing topic.
PowerShell Interview Questions
Question 18. I Can Print From Ms-dos-based Programs But Not From Windows-based Programs. How Can I Fix This?

Answer :

You may be able to resolve this problem if you click to clear the Check Port State Before Printing check box. To do this: 

Click Start, point to Settings, and then click Printers.
Right-click the printer that you want to use, and then click Properties.
Click Port Settings on the Details tab, and then click to clear the Check Port State Before Printing check box.
Click OK.
The basic input/output system (BIOS) in some computers incorrectly reports the printer port as being busy or not available. By default, Windows checks for these errors. When you click to clear the Check Port State Before Printing check box, Windows ignores these messages.

If you continue to have problems, use LPT1.DOS as the printer port. To add this port:

Click Start, point to Settings, then click Printers.
Right-click the printer that you want to use, and then click Properties.
On the Details tab, click Add Port.
Click Other, click Local Port, and then click OK.
In the Enter A Port Name box, type LPT1.DOS, and then click OK.
MS-DOS Interview Questions
Question 19. The Output From My Color Inkjet Printer Seems Better In Windows 3.1 Than In Windows 95 Or Windows 98. Why?

Answer :

Even though the universal printer driver quality of error diffusion and color-image support has improved in Windows 95 and Windows 98, an original equipment manufacturer (OEM) printer driver may be better for a specific printer. If you experience problems with Epson InkJet printers, use the Epson Windows 3.1 printer drivers. If you experience problems with Canon InkJet printers, use the Windows 95 or Windows 98 printer drivers.

Question 20. Does Windows Have Printer Drivers For Hewlett-packard Deskjet 600, 660c, 660cse, 850, Or 855c Printers?

Answer :

Windows 95 does not include drivers for these Hewlett-Packard DeskJet printers. Use the Hewlett-Packard DeskJet 550C printer driver until Hewlett-Packard releases drivers for these printers.

Windows 98 includes drivers for these printers, as well as many of the newer Hewlett-Packard DeskJet printers.

Windows Presentation Foundation(WPF) Interview Questions
Question 21. Why Can I Not Print To My Hewlett-packard Jetdirect Printer From Ms-dos-based Programs?

Answer :

If you install the JetDirect services in Direct mode, you cannot capture a printer port. If you cannot capture a printer port, you cannot print from MS-DOS-based programs.

Question 22. Why Can I Not Print To My Qms Jetscript Printer In Windows?

Answer :

Windows does not support QMS Jetscript printers. You may be able to use your QMS Jetscript printer by printing to the LPT1.DOS port.

Question 23. Does Windows Support Lasermaster Printers That Use The Winspool.Drv Driver?

Answer :

Windows does not support the use of the Winspool.Drv driver. You may be able to print to LaserMaster devices by using the appropriate Hewlett-Packard printer driver. In general, if the LaserMaster device requires fonts to be downloaded at an MS-DOS level, it will not work in Windows. Later versions of LaserMaster PostScript printers may work with Windows. For additional information, contact LaserMaster.

Windows Communication Foundation (WCF) Interview Questions
Question 24. How To Ssh From Microsoft Windows?

Answer :

Although Microsoft Windows does include an application to FTP and Telnet, it does not come pre-installed with an application that enables a user to SSH to another computer. If you need to SSH to a remote computer you need to download a third-party program to connect over SSH.

Red Hat Linux System Administration Interview Questions
Question 25. How To Rename The Microsoft Windows Recycle Bin?

Answer :

Windows Recycle BinUsers running Windows TweakUI 1.33

Note: This version of TweakUI is not available for Windows XP. If you have Windows XP and TweakUI, skip to the next section.

Click Start > Settings > Control Panel
Open TweakUI
Click at the Desktop Tab.
Right-click the Recycle Bin and rename it.
Question 26. How To Rename Or Label A Disk Drive?

Answer :

Microsoft Windows 95, 98, NT, ME, 2000, XP, Vista, 7, 8, and 10 users

Open My Computer (named This PC in Windows eight and 10).
From My Computer, right-click the force you want to rename and pick Properties. For example, if we wanted to rename the "Local Disk (C:)" visible within the picture underneath, we would right-click the C: power icon.
Within the Properties window, at the General tab, kind the new name in the Label box and click OK. (The Label field is the text discipline at the top of the General tab.)
Note: While you could rename a removable force, like an external hard power or USB flash power, after disconnecting and reconnecting the power it reverts lower back to its default name.

Wintel Administrator Interview Questions
Question 27. Where Is Tweakui Located Once It Is Installed?

Answer :

Windows XP Users: TweakUI is part of Windows XP Power Toys; it can be located with the aid of clicking on Start, Programs, Powertoys for Windows XP, and clicking TweakUI for Windows XP.

Windows ninety five, ninety eight, ME, and Windows 2000 Users: Once hooked up, TweakUI can be opened via the Control Panel.

Windows XP Interview Questions
Question 28. Where Can I Get Tweakui For Microsoft Windows?

Answer :

TweakUI is to be had for Microsoft Windows 95, Windows ninety eight, Windows ME, Windows 2000, and Windows XP. Below is a listing to every of the download places on Computer Hope where you could download TweakUI.

Question 29. In Windows 95 How Do I May Briefcase?

Answer :

A new Briefcase may be brought anywhere in Windows by means of following the steps beneath.

Move to the region you want to create a brand new Briefcase, e.G. The Windows Desktop.
Right-click in an empty spot and click on New after which Briefcase.
Installing Briefcase choice

If you're now not capable of upload a Briefcase the usage of the above steps and are the use of an early model of Windows the Briefcase alternative may be mounted by using following the steps under.

Open the Control Panel
Click Add/Remove Programs, Accessories, look for my briefcase, usually the first. If you do now not see it, there is good threat that this is already hooked up. If listed, take a look at the box, click on Ok, and then reboot laptop.
Windows Server Administration Interview Questions
Question 30. How To Make Files Not Go To The Recycle Bin In Windows?

Answer :

There are  techniques of creating files NOT visit the Recycle Bin when deleting them.

Use the Shift key: When deleting the record, press and keep the Shift key and then press the Delete key. This is a super shortcut key for customers who may need to hold the choice of sending files to the Recycle Bin by using default, however nonetheless be able to delete and not send some files to the Recycle Bin.

Disable the Recycle bin: Following the steps below will disable the function of sending documents to the Recycle Bin for all files.

Right-click on the Recycle Bin icon at the Desktop and pick Properties.
Select the option for "Do no longer flow files to the Recycle Bin. Remove files immediately while deleted" or "Do now not pass gadgets to recycling bin once deleted."
Click Ok.