Interview Questions.

Question 1. What Is Test Director?

Answer :

Test Director is a take a look at control tool produced with the aid of Mercury Interactive. Its 4 modules - Requirements, Test Plan, Test Lab and Defects Manager - are integrated to permit information to float easily between distinctive degrees of the testing process. Completely Web-enabled, TestDirector helps communique and collaboration amongst distributed checking out teams.

Test Director has been categorised inside the following categories:

Defect Tracking
Testing and Analysis
Debugging
Automated Software Quality (ASQ)
Question 2. What Is The Use Of Test Director Software?

Answer :

Test Director is Mercury Interactive's software program take a look at control tool. It helps pleasant assurance personnel plan and prepare the testing technique. With TestDirector you can create a database of manual and automatic exams, construct test cycles.

Test Director isn't used for executing any real test interest however it's miles a take a look at control tool used for Requirements Management, Test Plan, Test Lab, and Defects Management. Even if the character test cases are not computerized, TestDirector could make lifestyles a whole lot easier for the duration of the check cycles.

SILK TEST Interview Questions
Question three. How You Integrated Your Automated Scripts With Test Director?

Answer :

When you work with WinRunner, you could pick out to shop your exams at once on your Test Director database or whilst developing a check case inside the Test Director we will specify whether the script in automatic or guide. And if it's miles automated script then.

Question 4. Is There Any Possibility To Restrict Duplication Of Defects Being Created In Td?

Answer :

No Way. The handiest factor we can do is to locate the similar defects and delete or close them.

LoadRunner Tutorial
Question 5. What Is Quality Center( Test Director)?

Answer :

You can use Quality Center to create a mission (imperative repository) of manual and automated tests and additives, build test cycles, run exams and additives, and record and music defects. You also can create reports and graphs to help you evaluate the development of test planning, runs, and disorder monitoring earlier than a software program launch. When you work in QuickTest, you can create and shop assessments and additives without delay in your Quality Center challenge. You can run QuickTest exams or components from Quality Center after which use Quality Center to review and manipulate the results. You can also use Quality Center with Business Process Testing support to create business technique checks, constructed from the components you create in both QuickTest or Quality Center with Business Process Testing aid.

LoadRunner Interview Questions
Question 6. What Do You Call The Window Test Director-take a look at Lab?

Answer :

Execution Grid". It is place from where we Run all Manual / Automated Scripts

Question 7. After Creating The Test Cases In Excel And Exported To Td. How Does Test Director Know The Headings?

Answer :

To export the take a look at instances from spreadsheet to TD there are eight steps. In sixth step we need to map the Td fields with corresponding Spreadsheet columns. Hence you're the mapping so that you can map according to your specs.

WinRunner Tutorial WinRunner Interview Questions
Question 8. How To Use Testdirect Like A Dashboard?

Answer :

The new edition of TD (TestDirector for Quality Center) have to provide you with that. If you no longer want to improve, you have to design your own "start page", consist of the apps and bits you need to display, and use code to extract data from TD.

Question 9. Can You Retrieve A Test Case Once You Have Deleted Them In Test Director?

Answer :

In Quality Center, if you delete entire folder with exams, the tests get stored in Unattached folder. But if you simply deleted 'man or woman' tests, they're GONE! And can not be retrieved. Not sure if Test Director has the identical behaviour/capability.

There are 2 alternatives in QC. One is eliminate and any other is delete. The diffrence is that .As soon as it's miles remove it's miles removed from check set however avail in QC listing. If it's miles deleted, you can not retrive. If you press delete with a purpose to delete from that QC directory also.

QTP Interview Questions
Question 10. How Do We Import Testcases Written In Excel To Test Director?

Answer :

Use Mecury Interactive Microsoft Excel Add-in for importing take a look at instances written in excel sheet.
It is available on Add-ins web page.
Select the rows in excel that you want to upload to TD
Then select export to TD choice beneath tools menu.
QTP Tutorial
Question eleven. Is It Necessary To Learn Test Director For Beginners?

Answer :

Test director is a take a look at mangement device, it is used throughout all main businesses and is commonly used for management of all check sports in business enterprise.
It is crucial to research this tool, however for novices it's miles sufficient to apprehend a way to log defects into it and a way to run assessments the use of it.
Manual Testing Interview Questions
Question 12. Can You Please Explain The Procedure Of Connecting Testdirector In Qtp?

Answer :

To connect with TD from QTP follow the steps...

Open Qtp ==> Tools ==> Select TestDirector Connection ==> In Server Connction Box Enter TD cope with(URL of TD) ==> Click Connect==> In undertaking Connection Box Enter the Details Domain,Project,User call and Password ==> Click Connect
If you need to reconnect on startup check the reconnect on startup and shop password for reconnection on startup.
Then near.
SILK TEST Interview Questions
Question 13. What Are The Various Types Of Reports In Testdirector?

Answer :

For every and each phase we are able to get reviews, like for necessities, test cases, and test run. There are a few varieties of reviews additionally to be had like report summary, development file and necessities coverage report. 

Each and each test director client tool includes a menu bar Analysis. By the use of this menu you could crate reviews in table format. You can generate graphs. All graphs options in maths are supported. And you could create numerous varieties of charts too.

Quality Management Tutorial
Question 14. Td (exceptional Center nine.Zero) How Can You Run Automated Test Cases?

Answer :

While designing your check steps in QC for automation tests in check plan module, Test Script tab is availble. You can generate script here or replica from your automatioon tool. While jogging your tests, it will ask for on which host you need to run. You need to choose the gadget in your community. Then run it. Before going to run your script in a machine, the automation tool, like WinRunner, need to be set up on that gadget. Otherwise you'll get an error.

Question 15. Can We Add User Defined Fields To Test Director?

Answer :

Yes. We can upload the person defined fields the usage of TD 8.Zero, But you want to have admin privileges to this.

Quality Management Interview Questions
Question sixteen. How Do We Attach Excel Sheet With Test Director?

Answer :

This characteristic is for getting datatable(excel sheet) in take a look at director.

Try to apply it and as vbs document and get in touch with this function to get ur datatable.

GetAttachment(FileName, OutPath)

FileName The call of the attachment that desires to be copied
OutPath The folder place wherein the report wishes to be stored
Return cost The complete course where the file has been copied on the local file system
Example:

FilePath = GetAttachment("take a look at.Pdf", "C:")

MsgBox "Your file is right here:" & FilePath

The GetAttachmentFromTest finds the attachment related to the given check name and stores it in a neighborhood folder.

GetAttachmentFromTest(TestName, FileName, OutPath)

TestName The name of the take a look at wherein the attachment is placed
FileName The call of the attachment that want to be copied
OutPath The folder location wherein the record needs to be stored
Return price The complete path in which the record has been copied at the nearby report gadget
Example:

FilePath = GetAttachmentFromTest("Attachment", "whats up.Vbs", "C:aa")

MsgBox "Your file is right here:" & FilePath

Quality Center (QC) Tutorial
Question 17. What Is The Use Of Test Lab In Test Director?

Answer :

Test Lab can be used to create a check set. You can add one or many take a look at cases right into a check set. Then run all take a look at instances in a check set together and change the popularity as skip/fail.

Quality Control Interview Questions
Question 18. Can We Map The Defects Directly To The Requirements (no longer Thru The Test Cases) In The Test Director?

Answer :

Yes.

Create your req. Shape.
Create the take a look at case structure and the check instances
Map the testcases to the apr. Req.
Run and file insects from your test instances in the check lab module.
The database structure in TD is mapping testcase to defects, most effective if you have created the bug from the apr. Take a look at case. Maybe you may update the mapping by the usage of some code in the worm script module (from the personalize assignment funktion), as fare as I realize, its now not possible to map defects without delay to an req.

LoadRunner Interview Questions
Question 19. How Do I Run Reports From Test Director?

Answer :

This is the way you do it:

Open the take a look at director mission.
Display the necessities module.
Chose document
Analysis > Reports > Standard Requirements Report.

Software trying out Tutorial
Question 20. Can We Export The Files From Test Director To Excel Sheet? If Yes Then How?

Answer :

Design tab -- Right click -> visit save as -> pick excel and save it

Requirement tab -- Right click on fundamental req/ click on on export/ shop as phrase, excel or other template. This would save all the baby requirement.

Test plan tab-- only character check may be exported. No parent--toddler export is possible.Select a test script. Click at the layout steps tab. Right click on everywhere on the open window. Click on on export and keep as....

Test lab tab-- pick a child institution. Click on execution grid if it isn't always selected. Right click everywhere . Default save option is excel. However can be saved in doc and other codecs. Pick 'all' or 'selected' alternative.

Defects tab -- proper click on everywhere on the window, export all or 'selected' defects and save excel sheet or document.

Quality Assurance Interview Questions
Question 21. Can We Upload Test Cases From An Excel Sheet Into Test Director?

Answer :

Yes, you can try this. Go to Add In menu in TestDirector, discover the Excel upload in, and set up it in you system. Now open excel, you could find the new menu choice export to Test director. Rest of the method is self explanatory

Question 22. How Can We Map A Single Defect To Two Test Scripts? Is There A Way In Test Director So That We Can State That Defect Defect X Is Same For Test Script A And Test Script B?

Answer :

No way. When you run a script, you discover and generate a illness document. In other words, each illness document is precise to a unmarried test script.

Question 23. How Can We Create Our Own Defect Template From Test Director? Is It Possible In Test Director? If Possible How We Can Create Our Own Template?

Answer :

You can't create your very own template for defect reporting in Test Director but you can customize the Template in Test Director.

Quality Center (QC) Interview Questions
Question 24. How Can We Export Multiple Test Cases From Td In A Single Go?

Answer :

Open any check and click on the tab 'layout step'. Once it opens, you may right click on on the first mobile and export into any layout .

WinRunner Interview Questions
Question 25. How To Customize The Reports Generated?

Answer :

This depends plenty of what you are interested by "reporting on". You should combine each SQL and VB script to extract facts from TD to Excel.
Its additionally viable to "personalize" the same old reviews given from the "examine" tab, this is written in XML in case you are familiar with this language.
If you log in to Mercury assist you'll be capable of discover lots of code examples.
Question 26. How Many Tabs In Testdirector And Explain Them?

Answer :

there are four tabs available in Testdirector.

Requirement -> to song the patron requirenments
Testplan -> to design the testcases & to keep the testscripts
Testlab -> to exectue the testsets & music the outcomes
Defect -> to log a illness & to song the logged defects
Software checking out Interview Questions
Question 27. How To Map Requirements With Testcases In Testdirector?

Answer :

In requirements TAB pick out coverage view.
Select requirement by using clicking on Parent/Child or grand Child.
On proper hand facet (in Coverage View Window) any other window will appear. It has  TABS (a) Tests Coverage (b) Details. Test Coverage TAB may be selected via default or you click on it.
Click on Select Tests Button. A new window will appear on proper hand side and you will see a list of all tests. You can pick any test case you need to map with you requirement.
QTP Interview Questions
Question 28. How To Use Testdirector In Real Time Projects?

Answer :

Once finished the getting ready of the take a look at instances:

Export the test cases in to Test Director. ( it'll comprise general 8 steps).
The take a look at cases could be loaded inside the Test Plan module.
Once the execution is started out, we flow the check cases from Test Plan tab to the Test Lab module.
In Test Lab, we execute the take a look at instances and positioned as pass or fail or incomplete. We generate the graphs within the check lab for each day file and sent to the onsite (wherein ever you need to deliver).
If you acquire any defects and lift the illness inside the disorder module. When elevating the defect ,attach the illness with the display screen shot.
Question 29. How Can We Add Requirements To Test Cases In Test Director?

Answer :

You can add necessities to check cases in two methods; both from Requriements tab or Test Plan tab.
Navigate to the appropriate Requirement and proper click on, you could locate the menu to map the take a look at case and the vice versa is available in Test plan tab.
Rational robot Interview Questions
Question 30. What Does Test Grid Contains ?

Answer :

The Test Grid shows all of the assessments in a TestDirector venture.

The Test Grid contains the following key elements:

Test Grid toolbar, with buttons of instructions generally used whilst creating and enhancing the Test Grid.
Grid filter, displaying the clear out this is presently applied to a column.
Description tab, displaying an outline of the chosen take a look at within the Test Grid.
History tab, showing the adjustments made to a take a look at. For each change, the grid presentations the field name, date of the trade, name of the person who made the trade, and the new cost.
Question 31. How To Generate The Graphs In Test Director ?

Answer :

Open check director after which click on the Analysis you'll find three kind of graphs:

Planning Progress Graphs
Planning Summary Graphs
Defect Age Graph
Click any of one and you can generate the graphs..

The era of graphs within the Test Director that to Test Lab module is :

Analysis
Graph
Graph Wizard
Select the graph kind as Summary and click the Next button.
Select the show current assessments and click the subsequent button.
Select the Define a brand new clear out and click on the Filter button.
Select the take a look at set and click on the Ok button.
Select the Plan : difficulty and click on the good enough button.
Select the Plan: Status
Select the test set as x- Axis
Click the Finish button.
Question 32. What Is The Difference Between Master Test Plan And Test Plan??

Answer :

Master check plan is the doccumaent in which every and each useful point is verified.
Test case docuument consists of test instances, Test case is the belief with which opportunity of locating the defect is greater.
Test Cases Interview Questions
Question 33. What Is The Main Purpose Of Storing Requirements In Test Director?

Answer :

In TestDirector(Requirement Tab) We Stores Our Project Requirement documents according to our modules or functionality of the packages. This enables us to makes sures that all necessities are included while we trace advanced Test Case/Test Script to the necessities.This helps QA Manager to study what volume the requirements are included.

Manual Testing Interview Questions
Question 34. What Are The 3 Views And What Is The Purpose Of Each View?

Answer :

The 3 views of requirment are:

Document View-tabulated view
Coverage View-establish a dating among requirement and the check assosiated with them in conjunction with their execution popularity.Mostly the necessities are written in this view most effective.
Coverage analysis view-show a chart with requirementassociated with the check,and execution fame of the test.
Question 35. How Many Types Of Reports Can Be Generated Using Testdirector?

Answer :

Reports on TestDirector display data approximately test requirements, the check plan, check runs, and disorder tracking. Reports can be generated from every TestDirector module using the default settings, or you could customize them. When customizing a report, you can follow filters and kind conditions, and determine the format of the fields inside the record. You can in addition customise the report by adding sub-reviews. You can store the settings of your reviews as favorite perspectives and reload them as wanted.

Question 36. How Will You Generate The Defect Id In Test Director? Is It Generated Automatically Or Not?

Answer :

The Defect ID will be generated routinely after the submission of the illness..

Quality Management Interview Questions
Question 37. How Do You Ensure That There Are No Duplication Of Bugs In Test Director?

Answer :

In the disorder monitoring window, on the top we are able to see the discover comparable illness icon. If we click on after writing our illness, if any of the tester already added the same disorder it will inform. Else we will upload.

Question 38. Difference Between Winrunner And Test Director?

Answer :

WinRunner: Its an Automation Testing device, used for automation of guide written Test Cases to Test Scripts and Regression Test also.

Test Director: Its an Testing Management device, used from Creating Test Plan,Preparation of testCases, execution of testcases and producing disorder record.Also used for retaining Test Scripts.

Question 39. How To Add Test Id To Testplan?

Answer :

Create an object with a type = Number. Name it something like "Test_ID" within the Customize Entities vicinity.

Then go into the Workflow Script Editor to "TestPlan module script/TestPlan_Test_MoveTo" and insert the following:

if Test_Fields.Field("Your Object Name").Value <> Test_Fields.Field ("TS_TEST_ID").Value then Test_Fields.Field("Your Object Name").Value = Test_Fields.Field("TS_TEST_ID").Value quit if This will placed an item on every take a look at thet presentations the Test ID Number