Interview Questions.

Question 1. What Are The Different Configuration Steps In Sap Fiori?

Answer :

Configurations of SAP Fiori Apps are divided into  components:

Configuration of Transaction Apps and Fact sheets,
Configuration of Analytical Apps.
Before configuring something, the entire infrastructure for SAP Fiori apps must be set up. Once this is completed there could be sports to configure on lower back-stop and front-end servers.

Question 2. Note Down The Steps That Are Required To Configure Sap Fiori Transactional Apps?

Answer :

Step 1 Configuring SAP Web Dispatcher specifies routing rules to outline which URL is forwarded to which gadget is finished for each Transactional Apps and Factsheets.

Step 2 most effective desires to be configured for Factsheets. If we just should configure Transactional Apps we will skip step 2.

Step three is configuring the front-stop server and that is achieved for each Transactional Apps and Factsheets.

At excessive level we want to configure:

SAP NetWeaver Gateway
The Central UI Add-Ons (Launchpad Configuration)
Product Specific Add-Ons
Step four is configuring the lower back-give up server and this is accomplished for both Transactional Apps and Factsheets.

Viewing from a excessive level – Roles, Users and Authorizations

Note: Transactional Apps can run on any DB while the Factsheets have to run on SAP Hana.

SAP CRM Interview Questions
Question three. Note Down The Steps That Are Required To Configure Sap Fiori Analytical Apps?

Answer :

Step 1 Configure SAP Web Dispatcher:

Needs to be configured to specify routing regulations mentioning which URL is forwarded to which request

Step 2

Configuring authentication and SSO wishes to be performed within the HANA database.

Step three configuring the front-quit server:

Configuring NetWeaver Gateway
Central UI upload-Ons
Product specific add-Ons
Step 4 (Only needed for Smart commercial enterprise apps):

Enable consumer get right of entry to to KPI information
Model KPIs
Configure navigational targets for KPI catalogs
Question four. Kpi Framework Is Installed For Which Of The Following Apps?

Answer :

Analytical apps and the SAP Smart Business apps share the setup of HANA XS engine and KPI Framework only (in Smart Business Apps). After setup of SAP Fiori System Landscape with SAP Hana XS engine we need to be following the KPI modeler on the front-cease server and respective SAP Smart Business Products on SAP Hana server.

SAP CRM Tutorial
Question 5. To Enable Remote Logon For Users Who Use The Same User Data In Both Sap Netweaver Gateway Host And Sap System, Which Connection Type Needs To Be Configured?

Answer :

To define a agree with relationship among SAP machine and SAP NetWeaver gateway host with the aid of configuring SAP system to be trusting gadget and NetWeaver gateway host to be the trusted system. It allows faraway logon for users who use the same consumer data in each SAP NetWeaver Gateway host and SAP system.

To configure SAP system because the trusting gadget:

Create an RFC destination to be used within the trust configuration.
Define device to be trusting system the usage of transaction SMT1.
Configure the system to create and receive statement tickets from SAP NetWeaver Gateway host using SSO2 wizard.
To configure SAP NetWeaver Gateway host as relied on gadget:

Create an RFC vacation spot for speaking with the trusting SAP gadget.
SAP BI Interview Questions
Question 6. To Configure Enterprise Search In Back End, What Is Important Perquisite For This?

Answer :

To configure Enterprise seek in returned quit, we ought to have Embedded Search Technology setup.

Question 7. What Are The Different Authentication Methods That Can Be Configured In Sap Fiori For Internal And External Company Communication?

Answer :

By imposing SAP Single Sign-On, your apps grow to be automatically available after just one preliminary user authentication at the customers Windows computing device, with out a need for further log-on methods.

Kerberos technology is the technique of preference in intranet scenarios for SSO. It virtually re-makes use of your Windows area authentication for unmarried signal-on.

X.509 certificates provide a viable choice for creating a comfortable SSO infrastructure in case you're thinking about extending unmarried sign-on to extranet or pass-company eventualities.

SAP BI Tutorial SAP SD Interview Questions
Question eight. What Are The Components That Are Configured In Sap Front End Server?

Answer :

Configure ABAP Front-cease server consists of- Configure SAP NetWeaver Gateway, Configure the Central UI Add-On, Configure SAP Fiori Launchpad.

Question 9. What Are The Components That Are Configured As Part Of Configuration Of Kpi Data?

Answer :

Configure get right of entry to to KPI records (SAP Smart Business only) includes – permits consumer get admission to to KPI information, KPI modeler, Configure navigation objectives for KPI’s.

SAP MM Interview Questions
Question 10. Explain Sap Netweaver Gateway Central Hub Deployment In Sap Fiori?

Answer :

In NetWeaver Gateway Central Hub deployment − UI layer and SAP NetWeaver gateway is contained in ABAP Front-end server. The ABAP again cease server consists of business logic and lower back quit facts.

Separating commercial enterprise logic and lower back give up information from UI layer has underneath blessings:

Single Point of maintenance for UI problems- together with browser guide and updated version of SAP UI5 libraries.
Central area for theming and branding SAP Fiori Apps.
Routing and composition of multiple backend structures is supported.
Single Point of access to backend systems and superior safety due to no direct get entry to to backend system.
SAP recommends Central Hub deployment specially for Productive surroundings. Separate NetWeaver Gateway system is required.
SAP SD Tutorial
Question 11. Explain Sap Netweaver Gateway Embedded Hub Deployment In Sap Fiori?

Answer :

In Embedded Hub Deployment: NetWeaver gateway is deployed on identical server as the Business Suite. So a couple of Business Suite structures requires Gateway to be configured a couple of instances. It is not endorsed by way of SAP specifically for clients with multiple returned ends.

No extra separate NetWeaver Gateway system is required. It is typically used for sandbox purposes simplest.

SAP BASIS Interview Questions
Question 12. To Enable Communication Between The Front-stop Abap And Back-cease Abap Server, Which Communication Type Is Used?

Answer :

Trusted RFC:

Trusted RFC provides information from backend Business suite to the apps. SAP Business suite is found in ABAP back-quit server with all its modules- ERP, CRM, SRM, SCM. Fiori Apps are to be had in ABAP frontend server in Fiori Launchpad.

SAP CRM Interview Questions
Question 13. Transaction Apps, Factsheets And Analytical Apps Require Which Of The Sap System To Run?

Answer :

Transaction Apps are simplest apps that don’t ought to run on Hana system. They can run on any Database. All factsheets, Analytical apps and Small Business Apps run on SAP Hana. Only Fact sheet requires Search Models. Only Analytical Apps requires Hana XS Engine and KPI Framework is wanted for Smarts Business Apps.

SAP MM Tutorial
Question 14. What Is The Function Of Sap Web Dispatcher In Sap Fiori Architecture?

Answer :

SAP Web Dispatcher (Reverse proxy) is access factor for HTTP(s) request in SAP Fiori Architecture. It can take delivery of or reject connections as in keeping with consumer request.

Question 15. What Are The Components Of Sap Hana Extended Application Services?

Answer :

SAP Hana XS engine incorporates 2 additives-Hana Live App Content and SMART Business components with KPI modeler. Within Hana Live App Content VDM reuse content exist.

SAP ABAP Interview Questions
Question sixteen. What Is Mvc?

Answer :

The Model-view-controller sample defines domain modeling, GUI of application and input and moves primarily based on devices.

MVC technique defines in SAP UI5 has following factors:

Model:

A bridge between view and statistics of the apps and it accepts the request from view and responds therefore. It doesn’t rely on any of training.

View:

It manages the display of statistics (GUI of the software) and it relies upon on Model.

Controller:

It concludes the input given via devices and communicates to version/view to take proper movement. It also relies upon on version. View and Controller have 1:1 relationship. Controller entertains user requests acquired from View.

SAP BASIS Tutorial
Question 17. In Ui5 Data Binding Supports, What Are The Different Model Implementations?

Answer :

UI5 information binding helps three unique version implementations:

JSON Model supports statistics in a JavaScript Object Notation format and It supports two-manner binding.
XML model helps XML information and it supports -way binding.
OData version supports OData compliant records. It creates OData requests and handles responses. It consists of the open source library dataJS to handle OData requests and data. It helps -way experimental binding.
SAP FICO Interview Questions
Question 18. What Is Use Of Odata Protocol?

Answer :

OData is a protocol used to exchange facts on internet and changed into at the start evolved with the aid of Microsoft.It is primarily based on Atom Publishing and Atom Syndication standards, which in turn, are based totally on XML and HTTPS(S).

The Atom publishing layout doesn’t specify how Data ought to be encoded with in a feed therefore it fails to provide self-describing messages and fails to be completely RESTful. OData extends Atom with the aid of supplying a metadata description of message.

OData provides definition for:

Simple sorts
Complex Types
Association as well as Navigation course among entries.
Custom conduct
OData also adds an alternative illustration of statistics inside the format of JSON.
SAP BI Interview Questions
Question 19. In Netweaver Gateway Central Hub Deployment, What Are The Different Scenarios For Development? Which One Is Preferred And When?

Answer :

Scenario A: Central Hub Deployment — Development in SAP Business Suite Backend System

Advantage:

It allows to reuse records stored in the SAP Business Suite system without difficulty due to the fact that development takes place within the device in which data is saved.

Considerations:

To enable verbal exchange between the SAP NetWeaver Gateway device and the SAP Business Suite backend system, you have to install IW_BEP inside the backend device.

The existence cycle of SAP NetWeaver Gateway content is dictated with the aid of the frequency of updates inside the SAP Business Suite backend device.

Cons:

Requires separate NetWeaver Gateway gadget

Scenario B: Central Hub Deployment — Development in SAP NetWeaver Gateway System

Advantages:

Noninvasive deployment situation for SAP Business Suite backend gadget.

The life cycle of SAP NetWeaver Gateway content material is loosely coupled to the lifecycle of the SAP Business Suite backend device.

To allow outside access and fulfill security necessities, you can discover the SAP NetWeaver Gateway system in a demilitarized zone (DMZ).

You need only a unmarried set up of the SAP NetWeaver Gateway Add-Ons inside the system panorama.

Cons:

Requires separate NetWeaver Gateway device.

Considerations:

The SAP NetWeaver Gateway content implementation can not use most people of development objects in the SAP Business Suite backend device. Consequently we need to create copies of systems and data domains.

We must pick out this deployment state of affairs if we can't set up the SAP NetWeaver Gateway Add-Ons in the SAP Business Suite backend system. We may not be capable of installation Add-Ons in the backend device for motives of security, balance, or incompatibility (because of gadget launch).

SAP ABAP Tutorial
Question 20. What Is Embedded Hub Deployment And Where It Is Used?

Answer :

Embedded hub Deployment: Development in SAP Business Suite Backend System

Advantages:

Easy reuse of content material in SAP Business Suite backend gadget. We can reuse systems from the backend device and get admission to local enterprise logic.

Reduced total price of ownership (TCO) as we do no longer require a separate SAP NetWeaver Gateway system.

Considerations:

The life cycle of SAP NetWeaver Gateway content material is dictated via the frequency of updates inside the SAP Business Suite backend machine.

We should integrate the consuming application or infrastructure with the SAP Business Suite device on a point-via-factor basis. Cross-gadget composition isn't beneficial.

Central SAP NetWeaver Gateway content isn't to be had. Backend-precise content material is used inside the SAP Business Suite backend gadget.

Cons:

If a couple of SAP Business Suite structures are used Gateway might should be configured multiple instances.

Note: Embedded hub deployment is not recommended by SAP mainly for a patron with a couple of backend. This situation is used for sandbox functions simplest.

SAP PI Interview Questions
Question 21. How Do You Identify A Workflow Template In Sap Fiori?

Answer :

Workflow templates are prefixed with “WS”.

Question 22. To Diagnose Workflow Errors, Which Transaction Do You Use?

Answer :

SWI2_DIAG → to diagnose workflow mistakes.

SAP FICO Tutorial
Question 23. What Is The Use Of Defining Workflow Scenarios In Workflow Engine?

Answer :

Workflow situation aggregates one or greater workflow responsibilities in workflow engine and is represented by using a unmarried access inside the consumer software. The service /IWPGW/TASKPROOCESSING is furnished in the widespread.

SAP BPC Interview Questions
Question 24. Which Service Is Used By Sap Fiori Launchpad Designer To Read And Assign Transport Request?

Answer :

/UI2/TRANSPORT- Used by using SAP Fiori Launchpad dressmaker to examine and assign shipping request.

SAP SD Interview Questions
Question 25. How Data Flow Happens In Sap Fiori Launchpad? Explain The Steps.?

Answer :

Sequence of steps:

LPD_CUST
Launchpad Designer – Add a catalog, upload a group
Target mapping – semantic object, motion
Static/Dynamic Launcher
PFCG – Catalog, group

SAP PI Tutorial
Question 26. To Expose Our Gateway Service To Outside World, Where Do An Entry Must Be Created?

Answer :

In order to expose our Gateway carrier to outside global, we should create an entry inside the Service Catalogue on which ever server is performing as the Gateway hub.

SAP FI Interview Questions
Question 27. What Are The Different Rfc Authorization Objects In Sap Fiori?

Answer :

Authorization Object S_RFCACL

Definition:

Authorization check for RFC customers, especially for trusted structures

Defined Fields:

This authorization object carries the following fields:

RFC_SYSID: ID of the calling machine or the area of the satellite system.

RFC_CLIENT: Client of the calling gadget.

RFC_USER: ID of the calling consumer.

RFC_EQUSER: Flag that shows whether the consumer may be called by a consumer with the identical ID (Y = Yes, N = No)

RFC_TCODE: Calling transaction code.

RFC_INFO: Additional information from the calling device (presently inactive).

ACTVT: Activity

SAP MM Interview Questions
Question 28. Why Do We Need A System Alias If Gw_core And Iw_bep Components Are Installed On The Same Abap System?

Answer :

You want to recognise the device alias of the ABAP system in that you developed and configured the Gateway Service.

There are two opportunities right here:

If the GW_CORE and IW_BEP components are mounted at the identical ABAP machine, then the system alias will probable be “LOCAL”.
If they're set up on different structures, then even though machine aliases may be any name you like, they typically comply with the naming convention of <SID>_<Client> So the system alias for connecting to consumer two hundred of device C11 could typically be C11_200.
However this is best a convention, now not a rule.

SAP BPC Tutorial
Question 29. What Is Launchpad Designer Tool? Why Do We Need It?

Answer :

We can use SAP Fiori Launchpad clothier for configuring and developing organizations and catalogs which could then be accessed from SAP Fiori Lauchpad that is a single entry factor to all apps. We can seek these days released apps via search capability of Launchpad. Tiles that are available on Fiori Launchpad home web page are configured the use of Launchpad Designer Tool.

SAP CO Interview Questions
Question 30. What Are The Configuration Tasks That Need To Be Performed On Front End Server As Per Different App Types?

Answer :

We need to carry out positive configuration obligations on front quit server that are specific to app kind. We need to Activate OData Services for transactional apps and Factsheets but now not for Analytical apps. For analytical apps we want to configure get right of entry to to SAP HANA information.

Question 31. What Are The Different App Launched Tile Types In Sap Fiori?

Answer :

Static: It shows predefined static content material (textual content, icon).

Dynamic: It indicates numbers that can be examine dynamically.

News Tile: Flips through information messages according to the configuration of the tile.

KPI Tile: It displays KPI’s in actual time.

SAP Testing Tutorial
Question 32. What Are The Different Odata Services That Are Required For Sap Fiori Launchpad?

Answer :

OData services ought to be enabled in SAP Net Weaver gateway to establish mapping between technical OData call and the corresponding again-cease carrier. In order to setup SAP Fiori Launchpad and Launchpad dressmaker, we have to spark off 5 unique OData Services.

/UI2/PAGE_BUILDER_CONF
/UI2/PAGE_BUILDER_PERS
/UI2/PAGE_BUILDER_CUST
/UI2/INTEROP
/UI2/TRANSPORT

Business Objects-Crystal Reports Interview Questions
Question 33. What Are The Different Options In Sap Fiori Launchpad Design?

Answer :

Configuration Layer: Contains all content as added to customers together with translation.

Customization Layer: Customers alter content for all users in the device. We can use CUST layer for testing or other reasons. Content is transportable through customizing requests via clients. After customization, content material is decoupled from configuration layer and no automatic synchronization after adjustments to added layer.

SAP BASIS Interview Questions
Question 34. What Is The Use Of Pfcg Role Sap_ui2_user_700?

Answer :

The Launchpad consumer ought to have the PFCG role SAP_UI2_USER_700 assigned.

With this position the user can run the SAP Fiori Launchpad at the Personalization degree and has authorization to execute the following OData services:

/UI2/PAGE_BUILDER_PERS
/UI2/INTEROP
/UI2/LAUNCHPAD

Question 35. The Add-on Components In Back End That Require No Down Time For Installation Are Known As?

Answer :

Product particular UI Add-Ons

ERP − UI for EHP 7 for SAP ERP 6.Zero

SRM − UI for EHP3 for SAP SRM 7.0

SCM − SAP SNC USABILITY 1.Zero

CRM − UI for EHP3 for SAP CRM 7.0

PORTF and PROJ MGMT − UI for SAP PORTF PROJ MGMT 6.0

GRC − UI for SAP ACCESS CONTROL 10.1 SP3

Question 36. What Is The Use Of Sap Solution Manager And Application Lifecycle Management?

Answer :

SAP Solution Manager is the usual platform for Application Lifecycle Management (ALM), and plays a decisive position within the ALM tools. Besides providing SAP capability itself, SAP Solution Manager integrates the alternative equipment to make sure a comprehensive method.

SAP ABAP Interview Questions
Question 37. What Is The Use Of Ui Theme Designer? What Are The Benefits?

Answer :

Using UI subject matter fashion designer you can create your personal themes to evolve the visual look of applications.

One single tool for theming and branding SAP’s key person interfaces:

Apply your corporate branding and appearance to applications constructed with SAP UI technology. The UI subject dressmaker is a browser-based totally device for move-theming scenarios.

The tool is targeted at distinct person groups, inclusive of developers, visible designers, and administrators.

Key Features and Benefits:

Browser-based, graphical WYSIWYG editor:

Change the values of theming parameters and without delay see the way it impacts the visualization of the chosen preview page.
Build-in preview pages:

 

Select built-in preview pages to peer what your custom subject matter will seem like whilst it's far carried out to an software −
Application previews (as an instance, Purchase Order Approval, SAP Fiori Launchpad)
Control previews
 

Different levels of theming:

 

Quick theming (primary cross-generation subject settings)
Expert theming (era-unique topic settings)
Manual LESS or CSS editing
 

Color palette for reuse:

Specify a hard and fast of parameters with the principle shade values defining your company branding.
Cross-generation theming:

Create one consistent topic that applies to numerous SAP UI customers and technology −
SAPUI5 standard libraries (inclusive of SAP Fiori applications and SAP Fiori launchpad)
Unified Rendering technologies (which includes Web Dynpro ABAP and Floorplan Manager)
SAP NetWeaver Business Client:

Multiplatform and Multi UI technology aid.
Low Total Cost of Ownership.
Question 38. For Write Access To The Ui Theme Designer (create, Update, Delete Themes), Which Authorization Object Should Be Assigned?

Answer :

Authorization object: /UI5/THEME

ACTVT(Activity):02(Change) and

/UI5/THMID (Theme Id):* = all themes

Question 39. To Be Able To Use The Ui Theme Designer, Which Internet Communication Framework Icf Nodes Should Be Activated?

Answer :

To be capable of use the UI Theme Designer, Activate the following Internet Communication Framework (ICF) provider nodes:

/sap/public/bc/themes
/sap/bc/theming
To be capable of use SAP UI5 and NWBC preview pages, following ICF services have to be activated:

/sap/bc/ui5_demokit
/sap/public/bc/ui2
Question forty. How Can You Download Newly Created Themes That Are Published?

Answer :

You can use transaction /UI5/THEME_TOOL to download newly created topic and you will discover css in one of these folders.
You also can transport themes from one device to another (Eg: from Test to Production device) using the device for Customer Themes Maintenance.
Start the tool the usage of transaction: /UI5/THEME_TOOL
Navigate to the subject matter you need to move.
Select Transport and choose.
SAP FICO Interview Questions
Question 41. How Do You Extend An Odata Service (gateway Content Layer) In Sap Gateway?

Answer :

Transaction code SE11 is ABAP dictionary. By the use of this transaction code, you could create, change and display table entries and structures. At the preliminary display, you could put any tables or systems to view, edit or even create a new one. Transaction code SE11 is typically used a ABAP programmer.

SAP Gateway Service Builder (transaction SEGW)) is a design-time environment, which presents developers an easy-to-use set of tools for developing offerings. The Code-based totally OData Channel consumes it and supports developers all through the development life cycle of a provider.

SE80 - Object Navigator

SE 80 is a device to broaden and navigate applications and dd-obj.

SE80 Object Navigator → method all the items might be to be had there. In se80 in addition to viewing the items related to programming and lessons, there are greater privileges to view including a few other repositories including mime, item repository, object browser and all.

Question 42. Which Components Has To Redefine While Extending Gateway Layer Of Sap Fiori Application?

Answer :

IW_BEP on Business Suite
IW_FND on Gateway Layer
SAP PI Interview Questions
Question 43. What Is The Use Of Component.Js File In Ui Extensibility?

Answer :

The configuration is stored inside the factor.Js record of the custom utility. The element of the custom application desires to inherit from the main factor of the unique utility. To make the region of the authentic software or component recognized to SAPUI5, it could be essential to use check in Module Path. The configuration in the customizing section consists of the extension metadata and describes the gadgets which can be replaced or extended.

Question 44. What Is A Fragment And Views In Sap Ui5?

Answer :

Fragments are portions of a UI without their personal controller. The name of every view of fragment is important. A fragment have to be named as <NAME>.Fragment.Xml and a view <NAME>.View.Xml

SAPUI5 Views: Views are nothing but the application pages. We outline our user interface via creating Views. Views is shaped or created through the use of one or greater Controls in it say Page,SimpleForm,Dialog,Label,Input and so forth. Every view has its very own controller.

SAPUI5 Fragments: Fragments are the portions of UI similar to SAPUI5 Views. Whenever we need to apply a few similar UI elements oftentimes in our application/perspectives we create Fragments of these UI elements because Fragments are reusable and are light weight compared to VIews and Controls. Fragments are saved with inside the application itself and may be utilized by that software handiest. Fragments are described as View simplest and calling Views controller is shared with Fragment as Fragments aren't having their very own controllers.

Question 45. If Customization Doesn’t Run Properly, Is It Possible To Disable All Customization By Providing A Configuration?

Answer :

If a Customization doesn’t run properly, all customization can be disabled by offering a unmarried configuration. In help scenario, this will be accomplished by means of setting a breakpoint early in sap-ui-center.Js and then executing the subsequent code in the;

-window[“sap-ui-config”][“xx-disableCustomizing”] = actual;

For safety purpose this putting isn't always feasible using a URL parameter.

To sell off the entire extensibility data, use the following command in the browser Console:

sap.Ui.Center.CustomizingConfiguration.Log()

As a end result, an item is lower back in the Console which includes the customizing configuration, based by using sort of customization and examine call.

Question forty six. To Integrate Factsheets With Geographical Maps, Connection Is Set Up Between The Abap Back-end Server And The Map Provider. What Is Communication Channel?

Answer :

For reality sheets with integrated geographical maps, geographical coordinates and deal with facts are transferred from the ABAP returned-give up server to the map company the use of HTTP or HTTPS.

To make certain confidentiality and integrity of statistics, we strongly advise defensive HTTP connections with the aid of the usage of Transport Layer Security (TLS) or Secure Sockets Layer (SSL).

Question forty seven. What Is Sap Hana Xs Engine? How It Is Used For Business Suite And Kpi?

Answer :

For Analytical apps you need SAP Hana as underlying database, no exceptions. SAP Fiori leverages.

XS engine via using digital records models. Within XS engine there are 2 components: the HANA Live App content for respective enterprise suite and Smart enterprise element with the KPI modeler. Within the HANA stay content the VDM reuse content exists which may be changed.

In under Pic, you have got ABAP front give up server which incorporates the UI Add-Ons for respective products used, NetWeaver Gateway with OData enablement, the significant UI add-on and the KPI framework. These the front cease additives have read get entry to to the backend facts thru a relied on RFC connection.

Question 48. What Is Vdm In Hana Live? What Are The Different Types Of Views In Vdm?

Answer :

A digital facts model (VDM) is a established representation of HANA database views used in SAP HANA Live for SAP Business Suite and follows steady modeling policies.

It gives direct access to SAP enterprise facts the usage of popular SQL or OData requests. Business data is uncovered via nicely-defined database views, working directly at the tables of the SAP Business Suite structures and reworking them into consistent and effortlessly understandable views.

VDMs can help you get admission to statistics in one issue and use it in every other while not having to persist the facts a 2nd time.

A Virtual information model includes the subsequent styles of views:

Query perspectives are designed for direct consumption by using an analytical software (based on HTML5, for example) or a prevalent analytical tool (for instance, BusinessObjects gear). They are usually the pinnacle view in a hierarchy of views and aren't designed for reuse in other views. However, the digital information version additionally consists of query views to assist (showcase) programs primarily based on the digital facts version.The interface of the query views is stored solid. The name of a query view ends with Query and presents output fields in a format consumable by way of UIs.

Reuse views are the hearts of the digital facts model. They expose the commercial enterprise information in a properly-based, consistent and comprehensible manner, protecting all applicable business statistics in SAP Business Suite systems. They are designed for reuse through different views and must now not be fed on directly by using analytical gear.

Private perspectives encapsulate certain SQL modifications on one or several database tables or maybe other perspectives. They aren't categorized as reuse perspectives, as they may not deliver clean commercial enterprise semantics, however are alternatively intended to be reused in different perspectives. They are corresponding to subroutines or (private) strategies in programming languages. A non-public view may be based on database tables, different non-public views, or on reuse perspectives.

Value assist views (VHVs) offer the price list for a selected business entity this is utilized in a price help in a query view. Relevant enterprise entities are particular by an identifier or code. A maximum of one VHV is described for every business entity consistent with package deal. A VHV is included either in an underlying package to the commercial enterprise query views that employ it, or in the equal package. In SAP HANA, for every fundamental package a specific VHV exists for a particular commercial enterprise entity.

Question 49. Which Routing Rules Has To Be Defined In Sap Hana Studio To Configure Web Dispatcher To Use Https Request?

Answer :

Three routing guidelines want to be described in SAP NWG machine:

Default_host/sap/public
Default_host/sap/bc
Default_host/sap/opu

Two routing guidelines need to be defined within the HANA studio:

Content/sap/hana
Content/sap/hba
Question 50. In Sap Netweaver 7.31 Ep1, Which Roles Should Be Assigned To Fiori Launchpad Administrator?

Answer :

The Launchpad administrator should have the PFCG position SAP_UI2_ADMIN assigned.

SAP_UI2_ADMIN is a composite position containing the subsequent release-dependent roles:

SAP_UI2_ADMIN_700 for SAP NetWeaver 7.0
SAP_UI2_ADMIN_702 for SAP NetWeaver 7.0 enhancement package deal 2
SAP_UI2_ADMIN_731 for SAP NetWeaver 7.0 enhancement bundle 3 and SAP NetWeaver 7.3 enhancement package 1.