Interview Questions.

Question 1. What Are Steps To Install Sap ?

Answer :

Install os load the VGA and LAN drivers after growth the SWAP Memory three timesof physical RAM and Assign IP Address .
Install Kernel patches and java files
Install dialog and important example (Start à Programs SAP device setup of deploy DialogandCentral and Database instance .
C11a installation crucial and database example.
PARAMETERS:
1.Memory
2.Number of parallel system
3.Instance wide variety
4.SID
5.Central Transport host
6.Data base name
7.Sap statistics.. Up1 to Data six places .

Question 2. What Is The Folder It Will Ask To Install Oracle ?

Answer :

Orahome81 route=Oracle.

SAP CRM Interview Questions
Question 3. What Is You Allocate Disks To Different Areas In Sap ?

Answer :

a. Disk1,Disk2,(Raid 1 min four GB)à winnt, Saparch.
B. Disk3,Disk4( Stripe Min 4 GB)à change.
C. Disk5 (min four gb) Origilog A, Mirror log B, TRANS:
d. Origlog B , Mirror log A, SAPREORG.
E. Sapdata1, Sapdata2 ,Sapdata3 , up to Sapdata6.

Question 4. How Much Swap Memory Should Be In The System ?

Answer :

Three times of foremost Memory – at the least 2GB.

SAP CRM Tutorial
Question five. What Is Meant By The Terms L And F Access?

Answer :

An L get admission to approach refers to neighborhood printer. It is nearby to the SAP server, now not the user.

An F get entry to approach refers to the front give up printer. This makes use of the users Windows printer.

SAP HR Interview Questions
Question 6. How Many Types Of Work Processes ?

Answer :

There are 7 sorts:
( Dialog , Enque , Update , Background,Spool,Message server,Gateway)

Question 7. What Is Difference Between Central Instance And Dialog Instance ?

Answer :

Central Instance have message server mounted on it in which as Dialog Instance do no longer have message server.

SAP HR Tutorial SAP ABAP Interview Questions
Question 8. How To See The Work Process Status ?

Answer :

SM50.

Question nine. How Many Types Of Printer You Have Configured ? How Do You Differentiate Between Them ?

Answer :

four types of printers
Production Printing , Mass Printing ,Test Printing, Desktop Printing .

SAP HANA Interview Questions
Question 10. Where Printer Port(lpt) Is Running On The System ?

Answer :

Network and Desktop printers.

SAP ABAP Tutorial
Question eleven. What Is The Transaction Code For Creating Roles And How To Users And What Is Method You Will Follow ?

Answer :

PFCG , then we generate the profile after that assign roles to users.

SAP Crystal Reports Interview Questions
Question 12. Have U Applied Patches What Is The Transaction Code ?

Answer :

sure, SPAM.

SAP CRM Interview Questions
Question 13. What Are The Two Files Present While Importing Patches From Os Level To Sap Level ?

Answer :

PAT,.ATT.

SAP HANA Tutorial
Question 14. On Which System You Have Applied Patches ?

Answer :

DEV and QA.

Question 15. How Many Types Of Client Copies And Which Method Do You Prefer ?

Answer :

we opt for specifically remote Client Copy.

SAP SOLMAN Interview Questions
Question 16. What Is The Difference Between Remote Client Copy And Client Export ?

Answer :

RemoteCopy Using RFC connection we will carry out far off reproduction.

ClientExport Using TMS configuration we can perform patron export after which we must import customer to duplicate the purchaser – STMS needs to be created first for doing Client Export.

SAP Crystal Reports Tutorial
Question 17. How Mucn Time It Will Take To Copy A Client Of Size 650gb?

Answer :

More than 17 hours.

SAP Security Interview Questions
Question 18. What Is The Job Of Application Server?

Answer :

It takes the request from the person and if the request requires information than it connects to database server and offers output.

SAP HR Interview Questions
Question 19. What Are The Daily Activates?

Answer :

Background task logs, Spool Logs, Work Processes Overview , Users Overview, All Application Servers energetic or no longer .

SAP SOLMAN Tutorial
Question 20. What Will You Observe In St06 ?

Answer :

CPU, SWAP , Memory , Hard Disk Space.

SAP BPC Interview Questions
Question 21. What Is St03 ?

Answer :

Workload Analysis.

Question 22. What Is The Difference Between St06 And St03

Answer :

ST06 is OS Monitoring.
ST03 is used for - Monitor OS and Database and SAP System.

SAP Security Tutorial
Question 23. What Will Observe In St03?

Answer :

Hit Ratio and Buffer Fillers and Roll Memory and Swap memory .

SAP Netweaver Interview Questions
Question 24. Have You Configured Operation Modes?

Answer :

yes (RZ04,SM63,RZ03).

SAP ABAP Interview Questions
Question 25. Where Will You Change The Parameters In Three Profiles?

Answer :

Instance Profile ,RZ10.

SAP BPC Tutorial
Question 26. Can You Change The Profile Parameter In The Os Level? Which One Is Advisable Why ?

Answer :

We can change the profile parameter from OS stage. Its now not recommended .

SAP UI5 Interview Questions
Question 27. What Is Development Class ? Why To Create The Development Class ?

Answer :

Group of requests beneath one logical call is improvement class. When ever we exchange in R3 repository it need to be assigned to improvement calss and it internally assigned to move layer .

SAP HANA Interview Questions
Question 28. Do You Know About Oss What Do You Do With Oss?

Answer :

Yes it is on line gadget service.

SAP Netweaver Tutorial
Question 29. Do You Know Logon Groups At Which Situation Will Be Created Logon Group ?

Answer :

Yes, If we find load on utility server then we have to create logon organization (If the production department users are extra than we should create logon institution for that department ).

SAP Smart Forms Interview Questions
Question 30. How Many No Of Users Have Been Connected To That Particular Logon Group ?

Answer :

one hundred to 150 customers.

Question 31. What Is The Purpose Of Enqueue Processor ?

Answer :

Enque work process makes certain that database in consistent state.

SAP UI5 Tutorial
Question 32. What Are The States Of Back Ground Job ?

Answer :

6 states

Scheduled
Ready
Released
Active
Finished
Cancelled
 

 

Question 33. If A User Complaints That He Could Not Execute Some Of The Transaction Codes Then What Will You Do ?

Answer :

Use T-code SU53 , This will display which authorization is lacking in his profile.

SAP Crystal Reports Interview Questions
Question 34. What Are The Daily Transactions ?

Answer :

AL03,SM04,SM37,SP01,SM21 and so on..

Question 35. What Are Patches You Applied ?

Answer :

SAP_BASIS,SAP_ABAP,SAP_HR,SAP_SD.

Question 36. What Are The Different Types Of Sap Profiles?

Answer :

There are three types of profiles in SAP.
They are

DEFAULT.PFL (known as System Profile)
Start Profile
Instance Profile
SAP SOLMAN Interview Questions
Question 37. What Is Purpose Of Logon Load Balance?

Answer :

To dispensed the workload among software servers.

Question 38. Which Tcode Is Using Logon Load Balance ?

Answer :

SMLG.

Question 39. I Am Having Two Application Servers The Logon Load Balance Is There ; If The User Wants To Connect To Application Server Which Will Connected First.

Answer :

Messages server is will assign the Application server robotically.

Question forty. How Do You Distribute The Load.

Answer :

Depend upon the burden, consistent with module we need to configure logon agencies.

SAP Security Interview Questions
Question 41. How To Analysis Abap Dumps ?

Answer :

By seeing ABAP dump error we come to recognize that whether or not the error or developer technique.
 If belongs to insufficient memory dump mistakes show at which degree the transaction terminate and what sort of memory calls for. So that we ought to boom the reminiscence (Through Instance profile).
 If belongs to desk area errors it shows the desk call so that we increase the table area thru the SAPDBA.
 If belongs to software blunders we have analysis the ABAP application through se30.
 If belongs to developer technique cancel the ABAP application.
 

Question forty two. Each And Every Work Processor Is Full Even Though The User Wants To Execute The Program. Then What's The Solution ?

Answer :

If you don’t have 2nd applicaitno server than we ought to cancel te unique work processor (via SM50).
If u have second utility server than we have to configure the logon corporations.
 

SAP BPC Interview Questions
Question 43. At What Stages We Need To Transport The Requests?

Answer :

Whenever we want the exchange the objects and want to move we have to carry out transports like person request , purchaser shipping and so on..

Question forty four. How To Perform The Transport?

Answer :

Through STMS_IMPORT or through FTP.

Question forty five. What Is The Procedure To Applying Patches ?

Answer :

first we will down load the patches from the service .Sap.Com to Trans Directory . In the trans Directory extract the patches the usage of CAR command after that the use of SAPM we must import patches into sap stage and practice.

Question 46. How To Configure Tms ?

Answer :

Select all systems in a landscape and choose for domain controller and type stms and supply area name and visit remaing systems and configure the same and are available to dc and pick out configure and distribute alternative . Create shipping route and paths .

Question forty seven. If Your Sap Landscape Is Composed Of A Dev Server And Prd Server And You Need To Transport A Change Request From Dev Client 111 To Dev 131 (i.E. Transport In The Same Server). How Can This Be Accomplished?

Answer :

Transaction SCC1.

Question forty eight. We Have Recently Experienced Some Internet Outages Caused By Our Isp. Although We Have Resolved Our Isp Problems, The Users Refuse To Believe That Losing The Internet Connection Was To Blame For The Sap Problems. How Can We Ensure That This Was An Internet Problem And Not An Sap Problem?

Answer :

Open a upkeep window, connect to the device and kill the ISP connection and spot if this kills your connection. Repeat at will until they accept as true with that the ISP changed into the hassle.

Question forty nine. What Is An Ok Code? What Are The Differences An Ok Code To A T-code?

Answer :

An OK Code is utilized by a program to execute a feature for instance after a pushbutton has been clicked. A transaction code is a “shortcut” that allows a user run a program.

Question 50. Where Are T-code Name And Program Values Stored? How Can I Find A List Of All The T-codes In The Sap System?

Answer :

You can use transaction st11 to view Table TSTC. You can outline a brand new t-code using transaction se93.

Question fifty one. How Can One Disable The "import All" Button On Stms For The Queues?

Answer :

Login to your Transport Domain Controller. Run STMS->Overview->System. Choose the System you want to disable import all. Go to Transport Tool tab. Add/Create Parameter "NO_IMPORT_ALL" set its value to at least one.

Question 52. What Are The Different Types Of Work Processes In R/3?

Answer :

Dialog (D), Update (U), Enqueue (E), Background(B), and Spool(S).

Question 53. Why Can Web Help Be Considered Easier To Install Than Chm, The Standard Delivered Sap Help?

Answer :

Web assistance is less complicated than looking to get every far off person connected to a network percentage. If you do not want to apply SAP's assist website online, you may setup your very own internet site to do it. The best course depends on your commercial enterprise’ network structure.

Question fifty four. What Is The Difference Between A Client Copy And Client Refresh?

Answer :

Some times those are the equal, For instance, if you are performing a copy to an existing patron for the explicit purpose of updating the records, then it's far referred to as Client Refresh.

If you're copying to a newly created patron then it's far extra suitable to say “customer copy.”

Another manner of considering that is that a customer replica from manufacturing to a QA server or from production to DEV server is truly a patron refresh.

Question 55. What Is The Purpose Of Table T000?

Answer :

Table T000 incorporates a listing of described clients, which you could hold with transaction SCC4.

Question 56. What Is The Purpose Of Table Usr02?

Answer :

This desk shops User IDs and passwords.

Question fifty seven. What Is The Purpose Of Table Tadir?

Answer :

Table TADIR includes item listing entries.

Question 58. What Is The Purpose Of Table Tdevc?

Answer :

Table TDEVC includes development instructions and applications.

Question 59. How Can You Get A List Of The Users With Development Access On A Particular System?

Answer :

Table DEVACCESS.

Question 60. Where Can You Find A List Of Object Keys Included In A Transport?

Answer :

E071K Object keys contained within transports.

Question sixty one. How Can You Tell If A Transport Entry Is In The Process Of Being Imported?

Answer :

Check desk TRBAT.

Question sixty two. How Can You Find A List Of Objects That Have Been Repaired In The System?

Answer :

ADIRACCESS List of repaired gadgets and their get entry to keys.

Question sixty three. What Is The Difference Between Tp And R3trans

Answer :

TP controls the manner and calls several tools, like r3trans however additionally e.G. DDIC-Activation.

Question 64. Is There A Difference Between User Ddic And Sap_all/sap_new ?

Answer :

Yes, DDIC is hard coded to do some things other IDs cannot. But you need to be capable of activate tables in SE11 the use of a SAP_ALL consumer.

Question 65. What Is The Purpose Of The Unix File /and so on/passwd ?

Answer :

/and many others/passwd consists of valid user passwords, money owed, default login directories, and user security permission levels.

Question 66. Is It Possible To Install Ecc 5.0 As A Test System And Not Production, Without Installing Solution Manager?

Answer :

During the set up you will be requested for a key, that could most effective be generated by using the answer manager.

Question sixty seven. We Are Trying To Install Java-upload An Abap System As Part Of An Xi 3.0 Installation. At The End Of The J2ee Installation, While Trying To Start Sap J2ee Engine, A Timeout Error Occurs. How Would You Fix This?

Answer :

Increase paging space to twenty GB.

Question sixty eight. I Received 2 Transports (ok And R) To Be Imported From An External Vendor. We Need To Import These Into Our Qa System. I Have Moved The Transports To The Cofiles And Data Subdirectories. What Do I Need To Do Next?

Answer :

Follow pathway STMS -> Overview -> Imports.
Double-click on on QA's SID. Next, observe course Extras -> Other Requests -> Add. Finally, type delivery range and import as you will usually delivery.

Question sixty nine. We Have A Sap R/3 47x200 (unix/oracle) The Sapdba Program No Longer Exists Since We've Upgraded From 6.20 To 6.40. Where Can I Download Br*gear Gui For Oracle Dba -gui After Installing Kernel 6.Forty?

Answer :

You can nonetheless use SAPDBA from model 6.20.
You should but integrate it with BR*Tools 6.40.

Question 70. We Are Planning An Upgrade Of The Os From The Existing V5r2 To V5r3 Of Our I-series Server Which Hosts Sap Application. We Are Currently On R/3 Release four.6c At Support Pack Level 50. After We Do An Upgrade We Plan To Migrate All Applications To A Power five I-series 550 Server. Our Current Kernel Is Ascii 46d Patch Level 1977. Should We Consider A Sap Kernel Upgrade?

Answer :

Before upgrading OS , database or SAP model, Always replace your kernel to latest level.

Question seventy one. The Job "sap_collector_for_perfmonitor" Is Being Continuously Being Cancelled In Our Quality System Bw. I Keep Receiving An Error That Says The Load Program Is Not Found. What Should I Do To Resolve This?

Answer :

The trouble is in the help package. The Solution is you want to delete the SWNC* reports and insert RSSTAT83 and RSSTAT87 into TCOLL.

Question seventy two. Is There A Way To Change The Transport Request Number To Start With A Number That I Choose?

Answer :

Assuming your launch is 4.6, user SAPR3 is owner of the database. Call the final delivery variety by issuing “pick * from sapr3.E070L.” Change the shipping series quantity by means of issuing:
”Update sapr3.E070L set TRKORR='<SID>K9xxxxx'.”
If your SAP release is better than 4.6, update SAPR3 with the proprietor of the database.

Question seventy three. I Want To Change Five Dialog Work Processes Into Batch. Where Can I Do This?

Answer :

You can configure work techniques through parameters in RZ10. Use “rdisp/no_wp_dia” for conversation and “rdisp/no_wp_btc” for heritage. Or you could configure operation modes for that via RZ04.

Question seventy four. How Would I Setup Table Maintenance For Customized Table Z1?

Answer :

Use Transaction code SE11.

Question seventy five. The Temporary Spooling Table Space Is Approximately 5gb In One Of Our Customer's Production Systems That Runs 24 Hours A Day. We Would Like To Reduce This Over Time. What Strategy Would You Have For Reducing This Tablespace?

Answer :

You should time table report RSPO0041 for deleting the spool (TEMSE) items. Schedule it as a daily historical past task to be able to reduce impact to your device.

Question seventy six. I Installed The Kernel Patch 6.Forty Level 098 And Now The Transport System Is Not Working Properly. The Job Rddimpdp Is Not Starting, Although I Start It Manually. I Keep Receiving Error Messages. How Should I Solve This Problem?

Answer :

First cross into SE38 in both purchaser 000 and your operating purchaser. Run program RDDNEWPP. This will time table program RDDIMPDP with right parameters. Then, check if any "TP" programs are walking . If this is the case, test in /usr/sap/trans/log and search for the maximum latest documents contents.

Question 77. Is There Any Report Or Table In Which User Log Off Time Is Stored In Sap?

Answer :

There is no trendy record. However, you may find out about the consumer’s last transaction time in desk USR02 and field TRDAT, that is close to logoff time.

Question seventy eight. Is It Safe To Delete Old Background Jobs Using The Program Rsbtcdel While Users Are Working In The Prd Server?

Answer :

Yes. It is secure to run this application whilst users are working in view that this best deletes jobs that had been finished or aborted, not active jobs.

Question 79. We Are Currently Running 4.7 Enterprise On Oracle 9.2.Zero.6, On Solaris nine. I Am In The Process Of Upgrading Production Which Has A Central Instance Server And three Application Servers Where The Sapmnt Directory Is Shared Out From The Central Instance Server. I Upgraded The Kernel On The Central Instance With No Problems, But When I Try To Start Sap On The App Servers I Receive An Error Message Stating The Database Must Be Started From A Remote Server. I Have Changed All Environment Variables But I Still Receive The Error Message. What Could Be The Issue?

Answer :

Ensure that the Oracle client is properly established on every of the utility servers. Also, make certain which you are using the today's variations of all the kernel, related files (R3trans, tp, startdb, stopdb, and so on.) and the DB library.

Question 80. What Is Meant By The Terms L And F Access Methods?

Answer :

An “L” get entry to technique refers to nearby printer. It is local to the SAP server, now not the consumer. An “F” get admission to technique refers to the front cease printer. This makes use of the user’s Windows printer.

Question 81. I Am On Sap four.7, 6.20 Hp Ux Oracle. When We Complete Our Weekly Offline Backup, Application Is Not Coming Up And The System Goes Down. Which Log Will Give Some Input As To What Is Wrong With The System?

Answer :

Start with the alert log. It is commonly found in oracle/SID/saptrace/historical past/alertSID.Log.

Question 82. Will A Client Copy Transfer The Background Job Schedules And All Client Dependent Data?

Answer :

SAP_ALL will reproduction all purchaser based records which include schedules to the new client. Remember that ABAP packages are usually customer unbiased. Only the masterdata (version) is purchaser established.

Question eighty three. I Have An Abap+j2ee Instance On Xi three.1. Is It Necessary To Stop Web As And J2ee To Apply The Support Packs For J2ee?

Answer :

Any J2EE patches are implemented while machine is up and walking however no sports. The best patch carried out whilst machine is down are binaries (ABAP kernel).

Question eighty four. When I Check Transaction Sm37 And I Want To See The Spool I Get A Message That Says "no List Available." Why Is This?

Answer :

There are several feasible reasons. The spool is despatched to a printer and deleted. The spool is just too vintage and the housekeeper deleted it. Also, some test reviews simulate a calculation then rollback. It works great on line. When a historical past job does a rollback then it rolls lower back the spool as well.

Question eighty five. I Have Some Housekeeping Abaps That I Have To Create Variants For. There Are Cases When I Have To Specify A Time Interval For The Abap In The Variant. If I Explicitly Enter A Start And End Date They Will Remain At That Current Date Continuously. Is There Any Way To Dynamically Enter Dates In The Variant?

Answer :

In transaction SE38 input the variation call and pick out the attributes radio button. Here you may set the field to “choice variable.” Then, underneath choice variables button, you may define that it's miles SY -DATE+7.

Question 86. Some Transactions In Sap Are Seen As Customizing, For Instance Ovrf (updating Routes). In Some Systems This Is Set As Master Data And Can Be Set Open. Where Do You Do This?

Answer :

That depends on each transaction. Sometimes it's far determined by other configuration and from time to time it's miles set in step with machine function, production or test/increase/demo/and so on.

Question 87. We Are Running Win 2003, Oracle 9i, Sap four.7. We Are Having Performance Issues Around Tx Miro Which Updates Table Rbkp. Table Rbkp Has Five Indexes In Sap, But Only Three Of Which Exist In Oracle. Why Is This?

Answer :

In SAP there are many predefined indexes.
You can see those indexes through DB02->checks-> database ->ABAP dictionary ->display. Under non-obligatory indexes you see all indexes of which the definition is created in the dictionary, however not created at database degree.

Question 88. I Need To Do A System Copy From Prd To Tst. I Cannot Follow Sap Documentation, But Must Do It Manually. When I Run "@/tmp/tstcntrl.Sq.," Will It Change All The Prd To Tst In The Restored File Names? Would The Restored Files Be Recognized As A Tst System?

Answer :

You need to first open the DB as PRD for your new machine. Second, practice redo logs. Next, run your script to alternate SID. This will exchange SID but will not alternate tablespace names if the use of WAS 6.10 or above.

Question 89. Will Restarting The Prd Server Every Week Affect Server Performance?

Answer :

When you restart the server, the SAP ABAP application buffer and other buffers are emptied. As a ways as performance is going, the reports runtime can be a chunk longer at some point of the first run. You can restart the system each week without harm. The best cause in opposition to it could be the SLA/users call for.

Question 90. I Am Attempting To Complete A System Copy Of Bw. When I Try To Go In To Rsa1 Afterwards I Get The Error Message, "entry In Inbound Table Already Exists." What Should I Do To Solve The Problem?

Answer :

Read the homogenous device guide and follow all guidelines beneath “next steps” segment. Check transaction codes BDLS and SALE as well.

Question ninety one. One Of My Btc Jobs Fails When I Try To Run It, Giving Me An Error Message Stating "lock Table Overflow." It Recommends To Modify The Enqueue / Table Size Parameter To Solve This Issue. I Do Not Have This Value In My Default Or Instance Profile. How Do I Solve The Problem?

Answer :

Run ABAP RSPARAM software. It will give you the real fee of the SAP parameter and where they were set up. The lock table can hold 10,000 entries, which is extra than sufficient for the average gadget. It is possible that the program isn't written well and the developers have to modify it.

Question 92. I Am Working On A Backup Strategy To Disk. I Want To Perform A Copy_save_delete Equivalent On Various Disks. This Function Does Not Work For Disk Saves But Ideally I Would Like To Have Two Copies. Is There Another Function I Can Use?

Answer :

In your init<sid>.SAP document go online to some other pressure/server to keep every other reproduction of your archive log.

Question ninety three. While Doing Sap Installation Of Db Instance On A Different Box Other Than Ci, The Input We Have Given In Sapinst Of Db Instance Is Wrong In System Number Of Ci Instance. How Can I Change This Entry After Installation?

Answer :

You must reinstall the CI instance with the proper device number.

Question 94. Are Direct Updates On Sap Tables Allowed?

Answer :

You can call SAP functions at once to replace records (RFC calls) but it isn't recommended to attempt to manage data without delay at database level (sq. Scripts, jdbc).

Question ninety five. When Sending An Email From Transaction Sbwp I Wish To Enter The User's Login Name Only, Not An Email Address. Also I'd Like Sap To Look At The User Details Email Address And Communications Method Held In Su01 And Send The Mail To This External Email Address. Can This Be Configured?

Answer :

Yes. Follow pathway SO16-> Tab Mail Sys institution-> bottom radio button.

Question ninety six. In My Development Server When I Perform St02 The Program Buffer Shows A Value Of 1056 In Red Under The Swap Category. Users Are Getting A Shortdump With The Pxa Buffer Error Message. What Should I Do?

Answer :

Use “my hyperlinks” in “my signature” and use the keywords: PXA Buffer.

Question ninety seven. When We Install Sap R/3 Enterprise four.7, There Are Several Error Messages In The Sapview.Log. What Does This Mean?

Answer :

This manner that considered one of your load jobs did not run successfully.

Question 98. I Am Installing A Sap J2ee Engine At Crm. When It Reaches Phase 22 It Halts For More Than 10 Minutes And Gives Up Starting The System. What Should I Do?

Answer :

A restart is frequently the answer. If it's miles an add-in and you've got restarted your ABAP then you will be missing the profile parameters. If that is k and a restart does now not assist look in the work directory and take a look at dev_icontrol. If the J2EE engine software program is the problem, applying a patch will resolve the hassle.

Question ninety nine. How Do You Configure The Internet Email Gateway In Sap Netweaver 04?

Answer :

Starting with version WAS 6.X, SMTP comes constructed in to kernel. Go to transaction. SCOT and configure it there.

Question a hundred. We Setup A Saprouter In Dmz So That All Sap Requests Can Be Routed In And Out From That Machine And The Sap Application Servers Are Not Necessary To Be Exposed To The Internet User. However, The Saprouter Does Not Handle The Bw Web Reporting Application Requests. We Do Not Have E.P. Are There Any Tools Which Can Help Us To Route Web Reporting Requests The Way Saprouter Does?

Answer :

You need a SAP Web dispatcher. It acts like a SAP Router but routes SAP ICM site visitors. BW Web reporting is a BSP that sits on the ICM. You can search for sapwebdisp.Exe in the kernel directory or do a self-generated profile the usage of command alternative “bootstrap.”

Question one hundred and one. After A Recent Upgrade Of Kernel 6.20 To 6.40, While Doing A Transport I Received Several Warning Parameters Although Everything Looked Okay On Sap T-code Stms, What Should I Do About The Warning Parameters.

Answer :

You can delete these parameters from TPPARAM.

Question 102. We Have A J2ee + Abap 6.40 Instance Running A Portal 6.Zero. It Seems 1gb Of Memory Is Not Enough And J2ee Has Problems If We Assign More. What Can Be Used To Balance The Load In The Servers?

Answer :

You can create a 2nd server system using config-tool. Also, load balancing is possible through SCS.

Question 103. When I Release All Of The Requests To Dev It Is Not Being Displayed In An Import Queue On The Qa System (t-code Stms). When I Check The Log Of Transport Request Overall Status Is Successful, But A Message Appears Saying "keep: Other Transport Group." Why Is This Message Appearing?

Answer :

The shipping institution for QA is misconfigured. Go to STMS, then Overview. Double-click QA and choose communication. Next enter the perfect transport group and store.

Question 104. I Need To Schedule A Background Job To Run For three Consecutive Days And Would Like To Use Db13. How Can I Schedule A Report To Run From Db13 And Not Sm37?

Answer :

There is not any manner to time table a document to run from DB13 aside from pre-configured DBA jobs. Instead, use SM36 and make the roles occasion pushed.

Question one zero five. Is There A Way To Find Out What Was Entered In A Particular Transaction Code Screen?

Answer :

No, but you could analyze tables related to the transaction code and notice if there's a username subject that traces what this user has completed.

Question 106. I Want To Let Sap Skip Printing Cover Pages During Printing For Any Kind Of Report. How Can This Be Done?

Answer :

Find the source for the cover page. It will both be from SAP itself or the OS spooler. Take the best movement.

Question 107. I'm Trying To Send Email From Sap To Microsoft Outlook. When I Attempted To Configure Sapconnect It Failed. On Unix Level I Try To Run Command "mlunxsnd" And "mlosmadm" But Found That It Doesn't Exist In Unix. How Should I Solve This Problem?

Answer :

In versions with foundation release 6.20 or higher, you do not need to use sapconnect. Directly positioned your mail server inside the SMTP node in SCOT.

Question 108. In Our Dev System We Have Opened The Client With All Options "modified Without Automatic Rec," "changes To Repository And Cross Customization Allowed," And "safety Level-0 No Restriction" In Scc4. The Developers Complain That They Get An Error Message Saying The System Is Non-modifiable. What Should We Do To Fix This?

Answer :

In a DEV machine, set the global system trade alternative (SEO6) to modifiable for all namespaces/objects. The builders must have the ability to change any, together with SAP, namespace/object. Change patron options (SCC4) to “adjustments allowed for repos and move-purchaser cust” and radio button to “auto. Save changes.” Next, enable CATTS classes.

Question 109. If Sapconsole Telnet Screen Size Is Too Big How Do You Make It Smaller?

Answer :

Go to the manage panel, and then to the SAP console administrator and fashionable tab.

Question a hundred and ten. Is There A Way To Perform Sapgui 640 Roll Out Using A Centralized Server?

Answer :

Look for SAPADMIN and SAPSETUP on the installation CD. Then, use a utility which include Microsoft’s SMS to distribute this software or use a login script to call the SAPSETUP application.