Interview Questions.

Question 1. How Can Personal Computers On The Network Receive Permits?

Answer :

Depending on deployment, the following observe: 

Normal connected-to-the-server use : The entitled range of permits are stored on a server on the client premises. When a person starts offevolved a product with get entry to control enabled, a permit is requested from the server. Based on availability, either a allow is supplied or the request is rejected (due to the fact a permit is not available). When the consumer closes the product, the allow is lower back to the server. 

Borrowing from a server : While there may be a community connection from the consumer pc to the server, it's also possible to borrow a allow. Permits can be borrowed for no less than a day and for any period up to five years. While borrowed, the allow is stored on the local laptop, and is simplest available for use on that laptop. 

The local permit is used instead of trying to gain a permit from the server. This means that the computer can disconnect from the network and nonetheless use the blanketed product. While the allow is borrowed, it isn't available for use from the pool of allows at the server. This borrowed permit is usable until the day remember reaches 0. When the day count number reaches 0, the permit is not usable at the pc that borrowed it. The permit is made available at the server once more. 

Borrowing remotely : If there is no network connection, it's far feasible to apply gear on the product distribution media to borrow a permit remotely. When borrowed, the revel in is the same as for borrowing from a network. Note that for this process to paintings, there ought to be a technique for exchanging text documents (as an instance, by means of electronic mail or USB stick). 

Question 2. How Can I Deploy Permits To Computers That Are Not Connected To The Network, And Is It Possible To Limit Time Of Usage?

Answer :

The approximate technique for borrowing remotely is as follows:

On the remote laptop:

Run a command-line device (supplied on the distribution media) 
Send the ensuing textual content record to an administrator that has get admission to to the server.
On the network this is linked to the permit server:

The administrator runs any other tool. This device uses the record this is generated via the faraway laptop to borrow the required permits for the range of days required.
The administrator sends the ensuing textual content report to the user of the faraway laptop.
On the remote pc:

Run some other command-line device to use the permits.
IBM Lotus Notes Interview Questions
Question three. Is It Possible To Hand Over Permits On A Usb Flash Drive?

Answer :

Yes. Remote borrowing is viable, and borrowed licenses may be transferred on a USB flash power. 

Question four. What Is The Upgrade Path For Customers That Use Software License Management (slm)?

Answer :

The antique software program license management and new product get right of entry to management are not well matched with each other. To take benefit of product get entry to management, clients need to uninstall any present licensing mechanism before set up. Any SLM lets in come to be redundant and product get entry to control lets in need to be requested.

IBM Lotus Notes Tutorial
Question five. Can The Permits Be Maintained On Different Servers?

Answer :

Yes. You can hold allows on a couple of servers. A simple state of affairs would be to apply  servers on your network to ensure that a few lets in are constantly to be had. You would possibly have half of the full number of allows on each server. Under default operation, the customer pronounces a request to all servers on the network, and uses the primary one to reply. It is viable to configure the customer to go to a specific server, and additionally to configure a seek order. In this example, configure 1/2 your customers to hook up with server 1 first, and 1/2 to hook up with server 2 first. This configuration balances your utilization over the 2 servers and additionally gives a stage of backup inside the event of server failure. 

IBM Cognos Interview Questions
Question 6. Is It Possible To Place A Time Limit On The Allocation Of A Permit?

Answer :

It relies upon on the deployment: 

Normal related-to-the-server use : When a person begins the product, the computer requests a permit from the server. While the allow is allotted, that allow can not be utilized by each person else till it is lower back to the pool. When the person closes the product, the allow is made available to be used on another pc once more. 

Borrowing from a server & Borrowing remotely: In the 'borrowing' situation, a permit is allocated to the laptop for a term, starting from in the future up to five years. The advice is usually to set a practical 'borrowing' length. For example, if the person is running remotely for seven days, set the duration for seven days. 

Question 7. What Is The Smallest Time Period That A Permit Can Be Allocated For?

Answer :

Permits can be borrowed for not less than in the future. 

IBM Cognos Tutorial IBM Informix Interview Questions
Question 8. What Happens To A Permit If The Computer That Contains That Permit Is Stolen? Is It Possible To Retrieve The Permit?

Answer :

There is not any particular manner to "pull" a permit again to the server. Where 'connected-to-the-server' use applies, the allow is again as quickly as the program is closed. In the 'borrowing' scenario, the recommendation is to implement practical borrowing times.

For instance:if the consumer is operating remotely for 10 days, then set the borrowing time for 10 days. If the computer is stolen after seven days, at the 10th day the permit might be mechanically again. Alternatively, you can request a substitute allow file from IBM, which might then supersede your unique permit document. 

Question nine. Can I Manage Permits Myself?

Answer :

No. IBM affords a allow document that is dependent according to your wishes as defined in the request form. You aren't capable of configure the allow file after it's far delivered. If the shape adjustments over time, come again to IBM and request a substitute allow report. 

IBM DB2 Interview Questions
Question 10. Is It Possible To Limit The Number Of Permits Available For Checkout?

Answer :

Yes. Through some implementation setup, lets in can be constrained. In your design,

pick out at least two servers:

The first server holds maximum of the allows to be able to be allocated/to be had.
The 2nd server holds a small set of permits that aren't allotted and not marketed.
If a user wants get entry to to a product, and there are no permits available from the first server, provide get admission to to the second one server and use those permits.

IBM DB2 Tutorial
Question 11. Is It Possible To Report On Concurrent Usage?

Answer :

Each transaction this is accomplished by using the server is logged within the following format:

0 1 MTY1NQ== Fri Mar 12 14:42:fifty five 2010 1268404975 ANB.Principal v8 zero 1 0 Administrator TestBed_Shwcase 8.3.Zero.900 1 - - - - - - 0 - - - MA== 655259 MTI2OTA2MDIzNA==This log file can be exported as a CSV document. By looking at the highlighted entry, you may see how many allows are in use at that second. See the IBM i2 Product Access Management Administration Guide for more facts. 

IBM Mainframe Interview Questions
Question 12. Are The Product Access Management Capabilities Deployable And Supported In Virtual Environments?

Answer :

The virtual environments which are supported for every of the goods that use get entry to management are listed in the applicable device necessities files. 

IBM Lotus Notes Interview Questions
Question thirteen. We Have Hundreds Of Desktops That Require Product Access Management Capabilities. Can 'push' Tools Be Used (for Example, Sms)?

Answer :

Like the rest of our merchandise that use Microsoft Installer, silent installs throughout a community are feasible. The parameters which are used are described inside the IBM i2 Product Access Management Administration Guide. 

IBM Mainframe Tutorial
Question 14. Is Product Access Management A Proprietary Ibm Solution?

Answer :

No, product get right of entry to control is primarily based on third-party era from SafeNet inc. 

Question 15. What Operating Systems Are Supported By The Sentinel Rms License Server That Enables Product Access Management Capabilities?

Answer :

Sentinel RMS license server consists of guide for the following running structures:

32-bit variations of Windows Server 2000, 2003, and 2008
64-bit versions of Windows Server 2003, 2008, and 2008 R2.
IBM Maximo Asset Management Interview Questions
Question sixteen. Can Ibm I2 Intelligence Analysis Portfolio Products At Version 8.9 Be Installed Alongside Older Versions Of Those Products?

Answer :

No. 8.Nine merchandise are not well matched with earlier versions. 

Question 17. Is It Possible For An Administrator To Control When Permits Are Required?

Answer :

Yes. When a product is mounted with product get right of entry to control configured, a allow is constantly required, and the administrator controls get right of entry to to allows. 

IBM Lotus Domino Interview Questions
Question 18. When Permit Files Are Requested, What Information About My Network Is Accessible By Ibm?

Answer :

The lock codes which are used to perceive each server are generated the use of the server's MAC deal with and disk ID. The facts is encrypted with an SHA-256 algorithm. It isn't always viable to work returned to the unique records that generated the code.

IBM Cognos Interview Questions
Question 19. Is It Possible To Run More Than 1 Sentinel Rms License Server Per Machine?

Answer :

No, you may best run 1 Sentinel RMS license server consistent with device. You need to be able to use allows from a couple of software program carriers at the same server (the only factor to be be careful for is the model of the server software program). 

Question 20. What Might Prevent My Client Broadcast From Finding The Sentinel Rms License Server?

Answer :

The Sentinel RMS license server should exist in the same subnet because the patron broadcasting.

IBM BPM Interview Questions